Direct Straight Cut Rebar Continuous Wire Drawing Machine
Direct Straight And Cut Rebar Cold Rolling Ribbed Wire Drawing Production Line
Ribbed Wire Drawing Production Line Introduction:
Steel wire drawing production line mainly rolls diameter of 5-12mm common low carbon steel bar or low alloy steel bar with multiple cold rolling and a ribbing rolling. The molds make feinforcing steel bars with three-side crescent shape ribs. Steel wire drawing production line is to roll surface of steel coil round bar into three crescent sides. Raw material is hot-rolled low carbon steel rod.
Production flow: 1. Wire pay-off --- 2. Rust remover ---3.Scaling and reducing wire machine --- 4. Wire drawing machine --- 5. Wire ribbed machine --- 5. Straightening and cutting rebar machine---6. Finished product.
Ribbed Wire Drawing Production Line Features:
1. The reducer adopts the international reducer, which has large torque, low noise and strong durability.
2. The double-side reel is coated with cemented carbide or wear-resistant material.
3. Adopting the most advanced frequency conversion or electromagnetic technology in the world, it can save 40-60% of electricity, the lowest power consumption per ton is 8-10 degrees, the line speed can reach 90-230 meters per minute, and the production efficiency is improved by more than 40%. Protection of power transmission and transformation systems and electrical equipment is not damaged, which can greatly extend the service life of the machine.
4. rolling the shell body is cast with 45# pure steel, never cracking (Note: other manufacturers cast iron casting). The rolling mill turbine structure is integrated into one, and it is cast in 45# pure steel. It has no components, large pulling force, wear resistance, continuous teeth and durability.
5. The ribbed wire drawing production line can make coil rebar and straighten rebar according to your requirement. If need coil rebar. Need rewind machine to rewind rebar. The max coil rebar weight 2000kg.
Ribbed Wire Drawing Production Line Technical Parameters:
| Model | DX-15000T | DX-20000T | DX-30000T |
| Power | 37.5kw | 66kw | 80kw |
| Max input wire diameter | 13.5mm | 14mm | 14mm/16mm |
| Output wire diameter | 4-12mm | 4-13mm | 4-14mm |
| Speed | 75m/min | 120m/min | 150m/min |
| Ribbed machine type | 150 | 180 | 180 |
| Recoiler weight | 1T | 1T | 1T or 2T |
| Weight | 4T | 6T | 7.5T |
| Working dimension | 16-20 | 16-20 | 16-20 |
Ribbed Wire Drawing Production Line Applications:
Rebar is widely used in building, bridge, road and other civil engineering construction.
Large to highways, railways, Bridges, culverts, tunnels, flood control, DAMS and other public facilities, small to the foundation of housing construction, beams, columns, walls, boards, rebar are indispensable structural materials
Ribbed Wire Drawing Production Line Packing:
Ribbed Wire Drawing Production Line Photos:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.