Wire Diameter 3-6mm Mesh Width 2.5m Welded Wire Mesh Panel Welding Machine

Welded Wire Mesh Panel Welding Machine Introduction:

1. Control System
The control system adopts synchronous control technique. The welding time and separate welding are controlled by computer with PLC program touch screen system and HMI.

2. Mesh Pulling Part
The mesh pulling system controlled by servo-motor adopts elastic tension and opening positioning mesh, which improves the precision of mesh opening size.

3. Line wire sending part
The mesh sending system is controlled by computer. It simplifies the process that every tensile spring has to be changed when the wire diameter is different. You only need to change the pressure of welding point. Welding aperture can adjust randomly within range.

4. Wire Feed Way
The line wires and cross wires should be pre-straightened and pre-cut.
The line wire is feeding by the servo motor, pulling the mesh the servo motor auto. The cross wires are fed automatically from the multi hopper which capacity is more over ten times than the traditional hopper.

5. Welding Electrode
There are 48 pieces of electrodes that are special-designed and are made of square column copper. They show little wear rate and can be used on multiple sides.

6. Welding transformer
This machine equips 6 pieces of typical and efficient transformer, which has 8 grades, enlarging the welding wire diameter range. Every two welding electrodes need a water cooling transformer.

Welded Wire Mesh Panel Welding Machine Features:

1. Control system:Japan Panasonic intelligent PLC
2. Touch screen: Weiview(Taiwan).
3. Low-voltage apparatus :Schneider(France). Variable-frequency drive:Delta(Taiwan)
4. Brake clutch motor connect the pricipal axis directely, stronger power.
5. Cross wire feeding: Step hopper. Longitude wire feeding:Manually(or equipted with a wire feeding car).
6. Mesh pulling:Panasonic(Japan) servo motor,great power and precision.
7. Transformer cooling:Water cooling. Electrodes cooling: Water cooling, very efficient.

Welded Wire Mesh Panel Welding Machine Technical Parameters:

Welded Wire Mesh Panel Welding Machine Applications:

It is widely used in industry and construction, such as building board, the roof, the wall, the bridge, concrete road, the floor, the airport, cement pipe, concrete prefabricated components, retaining wall, protection slope, the tunnel, the dock, the dyke, construction reinforcing mesh; highway; railway; bridge; enclosure mesh; fencing and so on.

Welded Wire Mesh Panel Welding Machine Photos: