Width 2m Hole 50mm Length 80m Wire Mesh Welding Machines
Mesh Width 2m Hole Size 50mm Mesh Length 30m Wire Mesh Welding Machine
Wire Mesh Welding Machine Introduction:
This is our new developed wire mesh welding machine .The wire mesh welding machine adopts synchronons control technique, welding time and sub-control welding is composed of PLC program system. The mesh produced can be used for fence, high-speed railway fences, construction mesh.
1. This wire mesh welding machine adopts electrical & electronic synchronous control technique, both separate-phases welding and welding time composed of digital and integrated electric circuit, more intelligent and rational, press at one time, separate welding.
2. The line wire is fed from coil wires; the cross wire is pre-cut, fed from hopper driven by step motor.
3. Mesh pulling system adopts servo motor back and forward, adjusting the cross space by setting the parameters on the touch screen,different from traditional mechanical adjustment.
4. The welding speed is fast and it is easy to learn and operate. Only two operators are enough.
Wire Mesh Welding Machine Features:
1. This wire mesh welding machine can make roll mesh. Max roll mesh length 80m.
2. Longitudinal wires are fed from wire coils automatically and through straightening rollers
3. Cross wire should be pre-cut and fed by cross wire feeder automatically
4. The wire mesh welding machine is equipped with rolling machine to make roll mesh
5. Welding electrodes- chromium zirconium copper Upper-20mm diameter Lower-20*20*20mm, can be used 6 sides,The welding electrode distance can be adjusted.
6. Cast water cooling welding transformers Suitable for high temperature. When 2.5-4mm one welding transformer controls 8 welding electrodes. When 4-6mm, one welding transformer controls 4 welding electrodes.
7. Panasonic brand servo motor for mesh pulling, accurate, big power.air cylinders controls the hook up&down.J&T brand pulling rack, less noise, high accuracy.
8. The wire mesh welding machine is suitable for galvanized wire,balck steel wire.
9. The rolling mesh machine will rewind up the mesh automatically. The roll mesh length max up to 80m.
Wire Mesh Welding Machine Technical Parameters:
| Model | DX-GWC-2000D | DX-GWC-2500D |
| Wire diameter | 2.5-6.0mm | 2.5-6.0mm |
| Longitudinal wire space | 50-200mm | 50-200mm |
| Cross wire space | 50-200mm | 50-200mm |
| Mesh width | 2m | 2.5m |
| Mesh length | 80m | 80m |
| Manpower required | 2 guys | 2 guys |
| Welding speed | 60-75 times per min | 60-75 times per min |
| Number of welding electrode | 40PCS | 48PCS |
| Number of welding transformer | 160KVA*5PCS | 160KVA*6PCS |
| Material of welding electrode | CuCrZr | CuCrZr |
| Production capacity | 800 rolls at 8 hours | 800 rolls at 8 hours |
| Machine weight | 4.5T | 5.2T |
| Machine dimension | 30m*6m | 30m*8m |
| Power consumption | 6-7kw/h | 6-7kw/h |
Wire Mesh Welding Machine Applications:
The finished product roll mesh is widely used in house construction, road construction,fence.
Wire Mesh Welding Machine Photos:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.