SPCC Spcd Spce CRC Mild Steel DC01 DC02 DC03 DC04 Cold Rolled Steel Coil Sheet Factory Price
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
5-9 working days
Brand:
GNEE
Product Description
SPCC SPCD SPCE CRC Mild Steel DC01 DC02 DC03 DC04 Cold Rolled Steel Coil Sheet Factory Price
Cold rolled coil is a product made from hot rolled coil and rolled below recrystallization temperature at room temperature. It is mainly used in automobile manufacturing, electrical products, and other industrial applications. Cold rolling is performed at recrystallization temperature, but is generally understood as rolling using normal temperature rolling materials.
- The cold-rolled coil products are accurate in size, uniform in thickness, and the thickness difference of the coils generally does not exceed 0.01-0.03 mm or less, which can meet the requirements of high-precision tolerances.
- It is possible to obtain extremely thin strips that cannot be produced by hot rolling (up to 0.001 mm or less).
- The surface quality of cold-rolled products is superior, with no defects such as pitting or hot-pressed iron oxide often found in hot-rolled coils. Different surface roughness can be produced according to user requirements.
- The cold rolled plate has excellent mechanical properties and process characteristics (such as higher strength, lower yield limit, good deep drawability, etc.).
- High-speed rolling and full-continuous rolling can be realized with high productivity.
Classification
| Classification | Designation | Characteristics | Size (mm) | Main Applications |
|---|---|---|---|---|
| Commercial quality | SPCC, SPCCT | Commercial quality suitable for bending fabrication and simple forming; this is the type in greatest demand. | Thickness: 0.18-3.0 Width: 600-1500 |
Refrigerators, cabinets, power distribution boards and drums. |
| Drawing quality | SPCD | Drawing quality second only to that of SPCEN. Excellent uniformity. | Thickness: 0.18-2.0 Width: 600-1250 |
Automobile floor and roof panels. |
| Deep-drawing quality | SPCE, SPCF | Deep-drawing quality. With metallurgically controlled grain size, it retains its beautiful finish even after being deep-drawn. | Thickness: 0.18-2.0 Width: 600-1250 |
Automobile fenders and quarter panels |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Gnee Steel (tianjin) Co., Ltd.
Location
FLAT/RM 1512 15/F LUCKY CENTRE NO.165-171 WAN CHAI ROAD WAN CHAI HK
Contact Person
Kelly Zhang