SGCC Galvanized Steel Coil DX51D Zinc Coated Sheet for Corrosion Resistant Building Use
DX51D is a hot-dipped galvanized steel sheet, specifically designed as a low carbon, low hardness steel. The grade designation DX51D indicates a bending and forming grade galvanized sheet, where "51" denotes the serial number of the steel grade using low carbon steel as its base material. This steel offers excellent processability and weldability, making it ideal for manufacturing products such as home appliances, construction components, and automotive parts.
| Parameter Category | Description |
|---|---|
| Product Type | Galvanized steel sheets/pipes/metal parts (customize based on product) |
| Coating Thickness | 5-30 μm (typical range; adjust for corrosion resistance requirements) |
| Zinc Coating Weight | 60-275 g/m² (e.g., Z60, Z180, Z275 for varying corrosion resistance grades) |
| Base Material | Q235 carbon steel, SPHC cold-rolled steel, stainless steel, etc. |
| Standards | GB/T 13912 (China), ASTM A123/A153 (USA), JIS H8641 (Japan), etc. |
| Surface Treatment | Regular galvanizing, galvannealed (alloyed), pre-painted (post-treatment) |
| Dimensions | Thickness: 0.2-6 mm, Width: 100-2000 mm, Length: Customizable |
| Corrosion Resistance | Salt spray test: 48-1000 hours (time to red rust, depends on zinc coating) |
| Surface Finish | Smooth, spangle-free/minimal spangle/normal spangle (texture options) |
| Testing Methods | Magnetic thickness gauge (coating), weight method (zinc weight), visual/NDT |
| Applications | Construction, automotive components, power equipment, hardware, etc. |
- Excellent corrosion resistance: The galvanized layer protects the substrate through sacrificial anode action, effectively preventing corrosion of iron-based materials, especially in wet or corrosive environments.
- Various plating processes: Hot dip galvanizing involves dipping metal into high-temperature zinc solution to form thicker coatings with strong adhesion, suitable for outdoor structures. Electro-galvanizing deposits zinc through electrolysis, creating thin, uniform coatings ideal for decorative and high-precision parts.
- Appearance differences: Hot-dip galvanizing produces rough surfaces with dark colors, while electro-galvanizing creates smooth surfaces with uniform colors suitable for decorative purposes.
- Cost considerations: Hot-dip galvanizing offers higher corrosion resistance at greater cost, while electro-galvanizing provides thinner coatings at lower cost.
- Wide application areas: Used across construction, automotive, home appliances, hardware tools, aerospace, and other sectors to meet diverse requirements.
- Plating characteristics: Hot dip plating provides thick, protective coatings; electroplating offers thin, decorative finishes. Coating uniformity and adhesion directly impact product lifespan.
- Environmental sustainability: Proper disposal of hazardous waste generated during galvanizing processes is essential. Recyclability affects product life cycle assessment.
- Processability: Design considerations must account for changes in metal processability after galvanizing, such as stamping characteristics of galvanized steel.
- Performance enhancements: Improved wear resistance and mechanical properties, with enhanced electrical conductivity in some applications.
- Environmental suitability: Galvanized coating weathering resistance varies across environments (humidity, salt spray), requiring appropriate process selection for specific conditions.
Our galvanized steel products are widely used in the following industries:
- Construction: Roofing, siding, and decorative panels
- Appliance Manufacturing: Kitchen appliances, washing machines, and dryers
- Automotive Industry: Exhaust systems, decorative trim, and structural components
- Food Industry: Processing equipment, storage containers, and kitchenware
- Medical Equipment: Surgical instruments and equipment components
- Marine Industry: Marine hardware and corrosion-resistant parts
All products undergo rigorous quality control checks at every stage of production. Raw materials are sourced from trusted suppliers and meet international standards. Finished products are tested for mechanical properties, chemical composition, and surface finish. We are committed to delivering products that meet or exceed customer expectations.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.