D2.5 Deuterium Lamp Power Supply 2.5v 10 Volt UV Detector
Durable Deuterium Lamp Power Supply , Visible Ultraviolet Spectrophotometer DC Power Supply
Technical Parameters:
| OWPS-02162.5 |
| Voltage input: AC 85 ~ 265V |
| Maximum input current:0.5A |
|
Filament voltage: Preheat:DC 2.5V Working:0V |
|
Maximum anode voltage: Preheat:DC 125V Working:DC 80V |
| Anode current:300mA |
Constant flow accuracy: 0.05‰(after starting 1h) |
| Minimum trigger voltage:DC 550V |
| Withstanding Voltage:AC 1500V / 1min |
| Turn off signal: 3 ~ 12V / 1 mA |
| Dimension:130 * 99 * 40 mm |
| Net Weight:0.4kg |
Wiring:
Figure 1
Figure 1 AC input: L, N, PE( PE must be grounded)
Lamp: Filament-Filament-Anode
Control: ±
Signal:±
The Wire of the lamp must be well connected with the power supply!
The control Port has an optocoupler insulated with the power supply as the circult abobe. Control Mode: High Level: Turn Off, Low Level: Light Turn On. High Level Voltage Range DC3~12v, Current: Above1mA
Signal Port is a Feedback Signal Of The Lamp light on or off, the signal can be sued to CPU.
External Dimension:
Application:
The Deuterium Lamp Power Supply windely used in Landscape Photometer, HPLC Detector, Capillary Electrophoresis, Flue Gas Analyzer, Medical Equipment, Colorrimeter, Pollution Analyzer, etc.
More products information needing, please feel free contact with us. email: ivanzhu@junqitrading.com
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.