Deuterium UV Light Power Supply For Spectroscopic Equipments Atomic Absorption
Deuterium UV Lamp Power Supply For Spectroscopic Equipments / Atomic Absorption
Technical Parameters:
| OWPS-02162.5 | OWPS-021610 |
| Voltage input: AC 85 ~ 265V | Voltage input: AC 85 ~ 265V |
| Maximum input current:0.5A | Maximum input current:0.5A |
|
Filament voltage: Preheat:DC 2.5V Working:0V |
Filament voltage: Preheat:DC 10V Working:6-7V |
|
Maximum anode voltage: Preheat:DC 125V Working:DC 80V |
Maximum anode voltage: Preheat:DC 125V Working:DC 80V |
| Anode current:300mA | Anode current:300mA |
Constant flow accuracy: 0.05‰(after starting 1h) |
Constant flow accuracy: 0.05‰(after starting 1h) |
| Minimum trigger voltage:DC 550V | Minimum trigger voltage:DC 550V |
| Withstanding Voltage:AC 1500V / 1min | Withstanding Voltage:AC 1500V / 1min |
| Turn off signal: 3 ~ 12V / 1 mA | Turn off signal: 3 ~ 12V / 1 mA |
| Dimension:130 * 99 * 40 mm | Dimension:130 * 99 * 40 mm |
| Net Weight:0.4kg | Net Weight:0.4kg |
Wiring:
Figure 1
Figure 1 AC input: L, N, PE( PE must be grounded)
Lamp: Filament-Filament-Anode
Control: ±
Signal:±
The Wire of the lamp must be well connected with the power supply!
The control Port has an optocoupler insulated with the power supply as the circult abobe. Control Mode: High Level: Turn Off, Low Level: Light Turn On. High Level Voltage Range DC3~12v, Current: Above1mA
Signal Port is a Feedback Signal Of The Lamp light on or off, the signal can be sued to CPU.
External Dimension:
Application:
The Deuterium Lamp Power Supply windely used in Landscape Photometer, HPLC Detector, Capillary Electrophoresis, Flue Gas Analyzer, Medical Equipment, Colorrimeter, Pollution Analyzer, etc.
More products information needing, please feel free contact with us. email: ivanzhu@junqitrading.com
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.