SWT-MA315 PE Pipe Fitting Saddle Fusion Machine For Reducing Tee
 
Saddle Fusion Machine Introduction:

SWT-MA315 saddle fusion machine is suitable for welding PE PP PPR plastic pipe in all size. It is widely used to Agricultural, chemical, oil and gas pipelines, water supply pipes, drainage pipes etc, Because of the advantages of small and portable operation, it is favored by countries such as the countries of India, the United States, In the Middle East,Africa, and southeast Asia.
 
Saddle Fusion Machine Specification:

Saddle Fusion Machine Precautions:

1.The machine is used to weld pipes made from PE,PP,PVDF and can not be used to weld material without description otherwise the machine may be damaged or some accident may be resulted in.
2.Don't use the machine in a place with potential hazard of explosion
3.The machine should be operated by responsible ,qualified and trained personnel

4.The machine should be operated on a dry area.The protective measures should be adopted when it's used in rain or on wet ground.
5.The machine is operated by 220v±10%,50Hz,If extended wire should be used,it should have enough lead section according to its length.

 
Saddle Fusion Machine Products:

​Workshop Fitting Machine Include:

*A machine body with two working tables, both driven by hydraulic system;

*A operation panel with manual control;

*A milling cutter with gas spring, easier to lift up and down;

*A Teflon coated heating plate with steel cover, to make operator in safe;

*With full set of aluminum inserts and steel clamps, which make fittings elbows, tees and crosses.

​Workshop Fitting Machine Package:

Service:
 
Standard:Approved by ISO9001, CE,SGS,ROSH,EMC standard
Machine Quality Guarantee : 24 months.--- If any parts broken or does not work under normal operating, we are free to provide.