Galvanized Wire Weave Mesh For Playground Chain Link Making Machine

Introduction of Chain Link Making Machine

Chain link making machine is usually producing chain link netting in different size,the mesh hole size from 30mm to 100mm.The width usually from 0.5m to 6m.The mesh hole shap is diamond.The material feeding is wire mesh coil.So the machine is full automatic.One worker can operate several machines.

Chain Link Making Machine Technology

The machine is full automatic.From material feeding to the finish product of chain link fence, workers only need to press the start button.The wire go through the wire mould die to form diamond shap,the cutter cut the wire when it reachs the length.The locking device will make edge to twisted or knuckled.After the edge is locked,the roll netting device will make the chain link fence to rolls.The three function ( machine production,locking edge,roll netting) are carried out at the same time.

Chain Link Making Machine Parameter

Chain Link Fence Weaving Net Making Machine Packaging and shipping

1.One 20 foot container can hold two machines.The machine is nude packing in the container,it will be fixed in the container by steel wire rope to make it stable.

2.After receiving 30% advance payment, we arrange production.It takes 5 days to produce, and then deliver.

3.Port of shipment Tianjin Port

Moulds: Different mould can make different size of mesh hole.One machine has two free moulds.

In order to give you accurate quotation, we need the following information

1. The wire diameter of the mesh

2. The mesh hole size

3. The width of the mesh you need

4. The industry voltage of your country

5. How many machines you need