Concertina Barbed Mesh In Bangladesh Razor Barbed Wire Forming Machine

Razor Barbed Wire Forming Machine Description

The razor barbed wire machine is also called concertina barbed mesh machine.The machine consists of material decoiler, blade punching machine, razor strips recoiler, razor wire covering machine, control cabinet, etc.

Razor Barbed Wire Forming Machine Advantage

1. Easy to operate, convenient to maintain, competitive price from direct factory.

2. It maily consists of main machine which can produce the strip plate and coiling machine which can coil the wire into the strip plate.

3. Razor wire machine with nine strips is light-style, easy to operate, high efficiency, can save 20% raw material.

Precautions for use of Razor Barbed Wire Forming Machine

1. The machine should be carefully adjusted. The normal rear can be galvanized wire.

2. Adjust and exchange gears according to the required production wire.

3. Check whether the tool mounting is correct.

4. Pay close attention to the change of the knot pitch and adjust the handle in time.

5. The insurance pin must be inserted into the insurance hole to avoid accident.

6. After the machine is operated for 8 hours, it should be stopped to check whether the parts are loose.

7. Often refueling each lubricating part

8. Always wipe the waste residue and keep it clean.

Razor Barbed Wire Forming Machine Parameter

Razor Barbed Wire Forming Machine 

Razor Strips:After being punching,the strips is divided into two layers.

Razor Wire Covering Machine:This machine is automatic.It adopts counter to calculate the rolls loops.

End Razor Barbed Wire Mesh