707-98-14220 Lift Cylinder Sealing Kit Komatsu Wheel Loader WA30-5 Inner Parts
707-98-14220 Lift Cylinder Sealing Kit Komatsu Wheel Loader WA30-5 Inner Parts
| Product Name | 707-98-14220 Lift Cylinder Sealing Kit Komatsu Wheel Loader WA30-5 Inner Parts |
| Seal Kit Part Number | 707-98-14220 |
| Brand | SUNCAR/OEM |
| Condition | 100% Brand New |
| MOQ | Negotiation |
| Material | PU , Rubber , PTFE , NBR , HNBR |
| Hardness | 70-90 Shore A |
| Feature | Resistance to oil, weather, abrasion, solvent |
| Availability: | In Stock |
| Supply Ability | 3000 Piece/Pieces per Month |
| AppliC.A.Tion | Komatsu Wheel Loader System |
| Packing Detail | Customer Required |
| Delivery Time | 3-5 days after payment received(public holiday excluded) |
| Payment Policy | Western Union, L/C, T/T, , D/A, D/P |
| After-sales Service | Online support |
| Shipping Policy | By International Express(Fedex,TNT,UPS,DHL)Or Ship |
WA30-5 LIFT CYLINDER REPLACEMENT PARTS:
| Pos. | Part No | Qty | Parts name |
| G1. | 362-63-X2120 | [2] | CYLINDER ,LIFT (BLUE) |
| G1. | 362-63-X2220 | [2] | CYLINDER ,LIFT (YELLOW) |
| 362-63-02120 | [1] | CYLINDER ASSEMBLY | |
| 1. | 362-63-12740 | [1] | CYLINDER |
| 2. | 07143-10404 | [1] | BUSHING |
| 3. | 07145-00040 | [2] | SEAL,DUST (KIT) |
| 4. | 707-29-65840 | [1] | HEAD,CYLINDER |
| 5. | 07177-04025 | [1] | BUSHING |
| 6. | 707-51-40210 | [1] | PACKING,ROD (KIT) |
| 7. | 198-63-75190 | [1] | SEAL,DUST (KIT) |
| 8. | 07179-12052 | [1] | RING,SNAP |
| 9. | 07000-12060 | [1] | O-RING (KIT) |
| 10. | 707-35-52660 | [1] | RING,BACK-UP (KIT) |
| 11. | 07000-02065 | [1] | O-RING (KIT) OEM |
| 12. | 362-63-12720 | [1] | ROD,PISTON |
| 13. | 707-36-65270 | [1] | PISTON |
| 14. | 707-44-65180 | [1] | RING,PISTON (KIT) |
| 15. | 707-39-65190 | [1] | RING,WEAR (KIT) |
| 16. | 01580-02722 | [1] | NUT |
| 17 | 362-63-12760 | [1] | TUBE |
| 18 | 362-63-12770 | [1] | TUBE |
| 19 | 707-88-14810 | [1] | CLAMP |
| 20 | 707-88-97961 | [1] | CLIP |
| 21 | 01010-51020 | [1] | BOLT |
| 22 | 01643-31032 | [1] | WASHER |
| K. | 707-98-14220 | [2] | SERVICE KIT,LIFT CYLINDER |
Products show:
Hydraulic Seal installation requirements:
1. the hydraulic sealing gaskets and flange sealing surface should be clean
2. hydraulic sealing gasket diameter should be smaller than flange seal face outside and inside diameter should be slightly bigger than a pipe inside diameter
3. Sealing gasket pre-tightening force should not exceed the design rules
4. sealing asbestos gasket compression, it is best to use the torque wrench
5. Installing a sealing gasket, should be in order, in turn, tighten the nut
6.if there is any leakage, must be installed after antihypertensive treatment to replace or adjust the sealing gasket
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.