High Quality KATO O-Ring Kit O-Ring Kit Box Seal Kit For Excavator Sealing

O-ring is mainly used for static seals and reciproC.A.Ting seals. For rotational movement of the seal when limited to low-speed rotary sealing device. O-ring is usually installed on the outer or inner circle from the seal section is rectangular trench. O-ring seals still play a good shock absorption in oil, acid, wear, erosion and other environmental chemistry. Therefore, O-ring hydraulic and pneumatic drive system most widely used a seal.

Product Parameter:

Feature:

Wear-resistant, impact-resistant, heat-resistant, cold-resistant, uv-resistant, oil-resistant, corrosion-resistant, oxidation-resistant, anti-slip, resilience, shoock-proofing, anti-static, noise-absorbting, durabe, non-toxic, long lifes pan.

AppliC.A.Tions:

Mechanical sealing, fixed sealing, shaft sealing, hole sealing, dust prevention aealing, equipment sealing, pump sealing, flange sealing, hydro sealing, junction surface sealing and etc.

O-ring Installation Requirements:

Before installing the O-ring (O-shaped rubber seal), check the following items:

1. Whether the lead-in angle is processed according to the drawing, whether the sharp edge is chamfered or rounded;

2. Whether the inner diameter is deburred and whether the surface is polluted;

3. Whether the seals and parts have been coated with grease or lubricant (to ensure the media compatibility of the elastomer, it is recommended to use the sealed liquid for lubriC.A.Tion);

4. Do not use grease containing solid additives, such as molybdenum disulfide and zinc sulfide.

Advantages of O-rings:

Compared with other types of seals, O-rings have the following advantages:

1. Suitable for various sealing forms: static sealing, dynamic sealing;

2. Suitable for all kinds of materials, the size and groove have been standardized, and the interchangeability is strong;

3. Suitable for a variety of motion methods: rotary motion, axial reciproC.A.Ting motion or combined motion (such as rotary reciproC.A.Ting combined motion);

4. Suitable for a variety of different sealing media: oil, water, gas, chemical media or other mixed media;

5. Simple design, compact structure, convenient assembly and disassembly.

Product Image: