A11VO60 Main Pump Service Kit Fits REXROTH A11VO60 High Chemical Resistance Main Pump Replacement Kit

Product Show:

Precautions:

1.Before designing grooves, please read the descriptions of each series of products by yourself, and clearly distinguish whether the product uses an integral groove or a split groove; during the process of installing the seals, pay attention to avoid sharp edges, and the hole seals must be installed in the integral groove. With the help of installation tools; the designer must consider parameters such as groove dimensional accuracy, surface roughness, extrusion gap, etc. For details, please refer to the product instruction manual, diagram and size table.

2.Before installing the seal, it must be ensured that there are no impurities and cracks in the sealing groove, and operating oil should be applied to the sealing groove and the surface of the seal respectively; the seals should be installed gradually in sequence; Avoid twisting and skewing; if it is a split slot, tighten the gland last.

Other Products We Can Offer You:

Oil Seal

O-Ring 

Loader Seal Kit

Floating Seal

Hydraulic Breaker Seal Kit

Excavator Hydraulic Parts

Control Valve Seal Kit

Swing Motor Seal Kit

Crankshaft Rear Seal

Crankshaft Front Seal

Track Adjuster Seal Kit

Center Joint Seal Kit

(Main) Control Valve Seal Kit

Blade Lift/Tilt/Steering Cylinder Kit

Common AppliC.A.Tion Knowledge Sharing Of Hydraulic Seals:

Hydraulic rubber seal is a very common and popular sealing device, which plays a great role in some sealing problems in daily production and life. It is an extremely important way of existence whether it is to promote technological development or to prevent, mitigate and mitigate.

Hydraulic rubber seal is a kind of rubber product that has become a molecular material with high value after combining with qualified sealing technology. If it is under pressure, its elasticity will become very flexible. Therefore, the leakage can be compensated by increasing the contact area, so as to achieve the sealing effect.

The first more specific appliC.A.Tion of hydraulic rubber seals is dust prevention. One of the things that must be installed in all hydraulic cylinders is the dust ring. Obviously, the biggest role of the dust ring is to prevent dust, so as to improve the mechanical performance. Utilization rate, will not cause mechanical failure due to dust pollution.

Oil seals are rotating sealing elements in mechanical equipment, and oil seals are also divided into inner and outer frame oil seals. Due to its precise coaxiality, the outer frame oil seal is widely used in many precision mechanical equipment or coaxiality that requires a relatively high shaft degree.