Main Technical Specifications

1 .Max Design Speed: 200m/min

2. Max.Working speed: 150/min (5-ply)

3. Max production width: 2000mm

Annotation: the Kraft paper for testing of the corrugation plant line should keep the requirements as follows. (The temperature of the surface of the heating parts in the corrugation plant line is above 172 degree)

.Kraft paper’s level can not be lower than B level

.Water content: 11%±2%

.Face Paper: 100—250g/m2

.Core Paper:100--250g/m2

.Flute Paper: 100—200g/m2

4. Flutes combinations: A, C, B, E (or choose by the customer)

5. Steam requirements:

Steam cost: 4000 Kg/Hr Max pressure: 1.2Mpa

Practical Pressure: 0.8-1.2Mpa

6. Power supply: 410V 50Hz (Three phase four wire system)

7. Total Power: About 250 kw

Practical power cost: About 120kw

8. Area of the Production Line covers: About 90m×6m×5m (The specific length is based on the foundation drawing)

9. Corrugated board stacking direction: left or right according to the workshop to make sure the drive in left direction or right direction.

10. Equipment suitability: Kraft paper A, B, C native paper or imported Kraft paper.