1.Design speed: 200 m/minutes

2.Effective width: 2000mm

3.Cutter cutting accuracy: uniform length: 500-9999mm + 1mm

4.Computers can store multiple sets of orders, the man-machine interface, color touch screen display

5. Adopt Shanghai Futian 11KW AC servo motor and servo driver 15KW Kobe of Germany

6.Gear by precision forging material high-frequency quenching gear grinding, no backlash transmission, using advanced keyless connection, high transmission precision, long service life;

7.Use high speed steel spiral blade, saw blade type, reduce board resistance, low noise;

8.Before and after the 8 feeding roller adopts the sun wheel pressure paper, smooth delivery, uniform pressure, not easy to crush the cardboard or jam;

9.Using the independent two oil pump and the filter with 9 groups of purple copper pipe distribution in each gear oil supply, lubrication and cooling;

10.Knife roller: high quality precision forging steel, dynamic balance processing, good stability;

Main technical parameters:

1.Effective width of: 2000mm.

2.Operation direction: left or right operation(according to customer's factory to determine).

3.Maximum economic speed: 200m/min

4.Machine configuration: computer spiral cutter

5.Minimum cutting length: 500mm

6.Maximum cutting length: 9999mm

7.Cutting accuracy: ± 1mm(on same speed), ± 2mm(on variable speed)

Roller diameter parameter:

1.On the 1 cutting knife shaft diameter: Φ200mm handling of dynamic balancing

2 after the transfer roller diameter: Φ130mm handling of dynamic balancing

3 before and after the roller diameter: 70 mm

Note: The surface of all the roller are hard chromium plating after grinding. (Except for the upper and lower cutter shaft)

Power motor and electrical parameters:

1.Main drive motor power: 18.5kw; AC servo motor

2.Before and after transmission of paper motor power: 3.0kw; frequency adjustable speed motor

3.Oil pump motor power: 0.37kw