Auto Folder Gluer Machine With Adjustment

Auto Folder Gluer Machine With Adjustment

Adjustment instructions: According to size and position of the cardboard, adjust the left and right positions of the glue box to match the glue position of the cardboard.
 

According to the thickness of the cardboard, adjust (1) ,so that the cardboard is in contact with the bottom coating wheel. Base on needs,adjust (3) to control the glue amount. Observe (4) the glue position in time,(2) the diaphragm pump automatically circulates the glue.
 

4. Conveyor Belt Adjustment:

1) Adjust the belt gap

ment instructions:According to the thickness of cardboard, The gap between the two belts here can be adjusted height of the upper pressing wheel

When there is no paper feeding, according to the situation .The gap can be adjusted appropriately. If it is caused by the low pressure of the middle pressing roller, the U-shaped pressing belt can be adjusted Set the studs and adjust the appropriate pressure. When misfeeding occurs, it can be adjusted appropriately according to the situation. Tighten the side or tighten the loose side. The overall gap should not be too tight and balanced to.

(2) Adjust the tightness of the conveyor belt