240W 24VDC Automotive Electric Water Pump with CAN Bus - 2400L/H Flow Rate, 17m Head for BEV/PHEV Vehicles
Price:
Negotiable
MOQ:
5 sets
Delivery Time:
Negotiable
Brand:
OWO
Product Description
Product Overview
240W 24VDC automotive electric water pump with CAN bus interface for BEV bus and PHEV vehicle coolant circulation systems. This centrifugal pump features variable-frequency operation, low-noise performance, and advanced protection systems.
Applications
Widely used in hybrid buses, hybrid passenger cars, electric vehicles, trains, ships, and other heating and cooling circulation systems.
Key Features
- Magnetic force transmission technology
- High efficiency brushless DC motor with low power consumption
- CAN communication interface for precise control
- Constant flow control capability
- Comprehensive protection: reverse polarity, dry running, over voltage, over current, overload, over temperature
- Wide operating temperature range: -40℃ to +85℃
- IP68 waterproof rating
- Long service life exceeding 20,000 hours
Technical Specifications
Construction Materials
- Pump head housing: Die casting aluminum alloys
- Impeller: PPS+GF composite
- Shield cavity: PPS+GF composite
- Shaft sleeve: Carborundum composite materials
- Shaft: Stainless steel (3CR14)
- Magnet housing: PPS plastic encapsulation
- Seal ring: EPDM material
Electrical Parameters
| Working Voltage | Rated Power | Rated Flow | Dimensions | Weight |
|---|---|---|---|---|
| 18V-32V (24V nominal) | 240W | 2400 L/H at 17m head | 185×134×158 mm | 2200 g |
Connector Configuration
| Pin | Color | Function |
|---|---|---|
| 1 | Black | GND |
| 2 | Red | +24V |
| 3 | Yellow | CAN-L |
| 4 | Blue | CAN-H |
Connector model: 325304061AAH (matched with Plug 325304061AMH)
Operating Conditions
- Medium liquid temperature: -40℃ to +85℃ (-40°F to +185°F)
- Working ambient temperature: -40℃ to +85℃ (-40°F to +185°F)
- System pressure: -0.2 to 2.5 bar
- Noise level: ≤60dB
- EMC: Grade 3 compliance
Installation Guidelines
Important: This centrifugal pump requires pre-filling and should be installed at the lowest position in the system to ensure the impeller remains immersed in liquid.
- Install vertically or horizontally (outlet port upward when vertical)
- Avoid dry running - maximum 15 minutes dry running capability with automatic shutdown
- Use recommended diameter pipes (41mm nozzle diameter)
- Ensure proper pipe orientation to facilitate air discharge
- Install away from heat sources and dusty environments
- Use only recommended coolant mixtures (water with below 60% glycol)
Product Images
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Changzhou Bextreme Shell Motor Technology Co.,Ltd
Location
No.8 Tianshan road, Xinbei district,Changzhou,Jiangsu,China.
Contact Person
Sharon Xiao