Corrosion Resistance Prepainted Galvanized Steel AZ150 Coating
Al Mg Mn Color coated steel coil , CGLCC CGLCH
Introduction:
Strong corrosion resistance, 3 times that of galvanized steel sheet.The density of 55% aluminum is smaller than the density of zinc. When the weight is the same and the thickness of the plating layer is the same, the area of the galvalume steel sheet is 3% or larger than that of the galvanized steel sheet.
PRODUCTION PARAMENTERS
Description : Pre-painted galvanized /galvalume steel coil/sheet
Coil Weight : Standard is 5-8mt, always based on customers’ requirements
Thickness : 0.12mm~3.0mm
Width : 914mm,1000mm,1200mm,1219mm,1250mm,1500mm
Number and Mechanical Property
| No. | Tensile test | ||||||
| Yield strength Rel (MPa) | Tensile strength Rm (MPa) | Percentage elongation after fracture A% | |||||
| 1.8～＜2.0 | 2.0～＜2.5 | 2.5～＜3.2 | 3.2～＜4.0 | ≥4.0 | |||
| SPHC | ≥270 | ≥29 | ≥30 | ≥31 | ≥32 | ≥32 | |
| SPHD | ≥270 | ≥32 | ≥33 | ≥35 | ≥37 | ≥39 | |
| SPHE | ≥270 | ≥33 | ≥35 | ≥37 | ≥39 | ≥41 | |
| SS330 | ≥205 | 330～430 | ≥26 | ||||
| SS400 | ≥245 | 400～510 | ≥21 | ||||
| SAPH310 | ≥ | ||||||
| SAPH370 | ≥370 | ≥255 | ≥32 | ||||
| SAPH400 | ≥ | ||||||
| SAPH440 | ≥ | ||||||
Notes: 1. The tensile test specified value in the table is suitable for longitudinal test piece. 3. Steel strip is delivered in the state of hot rolling. | |||||||
PRODUCT APPLICATION
PACKING AND SHIPPING
Standard exporting package.wrapped with waterproof paper.Then after fully wrapped with high density PE film.Then after fully covered with iron sheet with metal edge protectors, strapped with metal bands, min 4 bands horizontal, min 3 bands vertical
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.