High Temperature Applications Hr Cr Coils Zero Spangle , Galvanized Slit Coil
High Temperature Applications Hr Cr Coils Zero Spangle , Galvanized Slit Coil
Stainless steel coil specifications :
| Product Name | Grade | Thickness | Width |
| Stainless Steel Mirror Sheet | 201,304,316,,430,etc | 0.4 -10.0mm | Normal Width: a)1,000mm b)1,219mm c) Customized |
| Polished Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | |
| Stainless Steel Hairline Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | |
| Brushed Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | |
| Colored Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | |
| Titanium Coated Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | |
| Embossed Stainless Steel Sheet | 201,304,316,,430,etc | 2.0 - 12.5mm | 2500mm×1250mm to 3600mm ×1500mm. |
| Stainless Steel Checker/Tread Plate | 201,304,316,,430,etc | 2.0 - 12.5mm | |
| PVD Coating Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | Normal Width: a)1,000mm b)1,219mm c) Customized |
| Food Grade Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | |
| Etched Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | |
| Decorative Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | |
| Perforated Stainless Steel Sheet | 201,304,316,,430,etc | 0.2 -10.0 mm | a)2.000mm wide(depending on perforation).b)1.500mm wide(depending on perforation) |
| Anti-fingerprint Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm | Normal Width: a)1,000mm b)1,219mm c) Customized |
| Oil-repellent Stainless Steel Sheet | 201,304,316,,430,etc | 0.3 - 3.0 mm |
Stainless steel coil introductions :
Stainless steel has smooth surface, high plasticity, toughness and mechanical strength, and is resistant to the corrosion of acid and alkali gas, solution and other media. It is an alloy steel, which is not easy to rust, but it is not absolutely rusty.It has general corrosion resistance similar to unstable ni-cr304. It has high temperature oxidation resistance, but the oxidation rate will be affected by internal factors such as exposure environment and product morphology. The total heat transfer coefficient of metal depends on the thermal conductivity of metal, but also on other factors. Stainless steel keeps the surface clean, so it can conduct electricity. Metals with higher thermal conductivity have better heat dissipation than other metals
Chemical Composition:
| Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
| 201 | ≤0 .15 | ≤0 .75 | 5. 5-7. 5 | ≤0.06 | ≤ 0.03 | 3.5 -5.5 | 16 .0 -18.0 | - |
| 202 | ≤0 .15 | ≤l.0 | 7.5-10.0 | ≤0.06 | ≤ 0.03 | 4.0-6.0 | 17.0-19.0 | - |
| 301 | ≤0 .15 | ≤l.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 6.0-8.0 | 16.0-18.0 | - |
| 302 | ≤0 .15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 8.0-10.0 | 17.0-19.0 | - |
| 304 | ≤0 .0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 8.0-10.5 | 18.0-20.0 | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0-13.0 | 18.0-20.0 | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0-15.0 | 22.0-24.0 | - |
| 310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | ≤ 0.03 | 19.0-22.0 | 24.0-26.0 | |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
| 316L | ≤0 .03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0 - 15.0 | 16 .0 -1 8.0 | 2.0 -3.0 |
| 321 | ≤ 0 .08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0 - 13 .0 | 17.0 -1 9.0 | - |
| 630 | ≤ 0 .07 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | 3.0-5.0 | 15.5-17.5 | - |
| 631 | ≤0.09 | ≤1.0 | ≤1.0 | ≤0.030 | ≤0.035 | 6.50-7.75 | 16.0-18.0 | - |
| 904L | ≤ 2 .0 | ≤0.045 | ≤1.0 | ≤0.035 | - | 23.0·28.0 | 19.0-23.0 | 4.0-5.0 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | ≤0.02 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
| 2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | ≤ 0.03 | 0.19 -0. 22 | 0. 24 -0 . 26 | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | - | 11.5-13.5 | - |
| 430 | ≤0.1 2 | ≤0.75 | ≤1.0 | ≤ 0.040 | ≤ 0.03 | ≤0.60 | 16.0 -18.0 | - |
Physical Properties:
| Density | Thermal Conductivity 212°F (100°C) |
| 0.285 lbs/in3 | 9.0 BTU/hr/ft2/ft/°F |
| 7.89 g/cm3 | 15.6 W/m-°K |
| Specific Heat | Melting Range |
| 0.12 BTU/lb-°F (32 – 212°F) | 2500 – 2590°F |
| 502 J/kg-°K (0 – 100°C) | 1480 – 1530°C |
| Modulus of Elasticity | Electrical Resistivity |
| 28.5 x 106 psi | 30.7 Microhm-in at 68°C |
| 193 GPa | 78 Microhm-cm at 20°C |
Mechanical Properties:
Typical Values at 68°F (20°C)
| Yield Strength | Ultimate Tensile | Elongation | Hardness | ||
| 0.2% Offset | Strength | in 2 in. | |||
| psi (min.) | (MPa) | psi (min.) | (MPa) | % (min.) | (max.) |
| 45,000 | 310 | 85,000 | 586 | 50 | 202 (HBN) |
Stainless steel coil application:
1. Buildings And Constructions
Floor Decks, Ceilings, Duct Work, Roofing, Siding, Sashes, Beams, Fences, Verandas, Shutters,
Awnings,
Partitions, Indoor Decorations, Pipes, Ventilators, Sheds, Culverts.
2. Transportation
Body Pane, Air Cleaners, Oil Filters, Fuel Tanks, Containers, Highway Barriers.
3. Appliances
Light Fittings, Washing Machines, Dryers, Coolers, Vending Machines, Water Heaters, Stoves,
Refrigerators, Freezers, Tool Boxes.
4. Agriculture
Barns, Dryer Panels, Animal Houses, Hoppers. Bar Supporters, Irrigation Systems, Green Houses.
5. Others
Furniture And Office Equipment, Entertainment Machines, Car Ports, Garden And Storage Sheds
Loading pictures of stainless steel coil :
FAQ:
Q: Can you send samples?
A: Of course, we can send samples to all parts of the world, our samples are free.
Q: What product information do I need to provide?
A: You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
Q: What are the shipping ports?
A: Any port in China.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: What are the certifications for your products?
A: We have ISO 9001, SGS, EWC and other certifications.
Q: How long does your delivery time take?
A: In general, our delivery time is within 20-25 days, and may be delayed if the demand is extremely large or special circumstances occur.
Q: Can I go to your factory to visit?
A: Of course, we welcome customers from all over the world to visit our factory. However, some of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.