15000 BPH 500ml Automatic Drinking Water Filling KSCGF32A
500ml Automatic Drinking Water Filling
mineral water plant cost :3-in-1 filling monoblock, combined with rinsing, filling and capping. It is used for water bottle rinsing ,water filling and bottle capping . It widely use for bottling filling pure water, drinking water ,mineral water, spring water, portable water ,flavored water ,sparkling water.
|
Model |
KSCGF08B |
KSCGF32A |
KSCGF40A |
KSCGF60A |
|---|---|---|---|---|
| Capacity | 12000 BPH | 15000 BPH | 24000 BPH | 36000 BPH |
| Rinser；24 | Rinser；32 | Rinser；40 | Rinser；60 | |
| Modules | Filler；24 | Filler；32 | Filler；40 | Fille；60 |
| Seamer；8 | Seamer；8 | Searner；15 | Seamer；20 | |
| Bottle type | PET； D=50〜97mm； H=150~320mm | |||
| Installed capacity | 5kw | 7kw | 9kw | 11kw |
| Compressed air consumption | 0.6Nm3/min,0.6MPa | 0.8Nm3/min,0.6MPa | 1Nm3/min,0.6MPa | 1.2Nm3/min,0.6MPa |
| Water consumption | 1.5~2m3/h,0.25MPa | 1.5~2m3/h,0.25MPa | 2.5 〜4m3/h,0.25MPa | 3.5~6m3/h,0.25MPa |
| Size | 3000X2300X2500 | 3360X2540X2500 | 3550X3250X2500 | 5800X4500X2500 |
| Weight | 6t | 7.2t | 10t | 15t |
| Washout rate | 100% | |||
| Filling liquid level error | ±3mm | |||
| Bottle damage rate | W0.08% | |||
| Domoge rate of bottle cap | W0.5% | |||
| Sealing pass rate | N99.7% | |||
| Capping torque | 0.6〜2.8N.m Fluctuation range ± 15% | |||
| Liquid loss rate | W0.3% | |||
Bottle infeed
Bottle infeed by combination of infeed starwheels.
Equipped with bottle jam protection device.
Bottle Rinser
1.The rotary wheel is a fully stainless steel welded structure.
2.The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.
3.The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
4.All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
5.The rinser is driven by driving system positioned inside machine frame via gear transmission.
6.Made of stainless steel of superior quality.
7.Equipped with bottle jam protection device.
Bottle Filling
1.Rotary wheel fully made of stainless steel SUS 304.
2. Gravity filling method.
3.Filling valves are made of SUS316L.
4. Filling valves are reasonably structured with accurate filling.
5.Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
6.Level of cylinder is controlled with float-ball.
7.Filler is driven through gears inside the machine frame.
8.Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
Bottle Capping
1.It import of advanced technology of screw capping, improve the stability and reliability of the screw capping machine. The magnetic torque is used for screw capping. the power of screw capping can be adjusted without steps. The power of the screw capping can also be fixed, and the caps will not be damaged, the capping is reliable.
2.In the screw capping part. it installed photoelectrical control , when it has no cap ,or the cap is bad, the machine will stop automatically.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.