LKM.HASCO. DME or Chinese standard Medical Plastic Injection Tooling & Molding Parts
 
Plastic Material:PP,ABS,PC, TPE, PE, TPU, PPSU, PSU,PEEK, PEI, PBT, PA, LSR, POM,PCTG,PC/ABS
 
Plastic Surface finish:Polishing finish,Texture Finish,Glossy Finish, Painting,Printing, VDI-3400,plating
 
Drawing format:UG, IGES, STEP,x_t, AutoCAD, Solidworks,Catia, PTC Creo, DWG, PDF, etc..
 
Certificated:ISO13485, ISO14001
 
Range of markets:Life Sciences,Diagnostics
 
Mould Material:S136, NAK80
 
Hot runner:Synventive, Incoe, HRS, moldmasters, HUSKY, EWIKON, Guenther,BHT
 
Injection machine size:30T-250T
 
Cavities:1-64
 
Product Info

Injection Molding

The injection molding process uses a granular plastic that is gravity fed from a hopper. A screw-type plunger forces the material into a heated

chamber, called a barrel, where it is melted. The plunger continues to advance, pushing the polymer through a nozzle at the end of the barrel that is

pressed against the mold. The plastic enters the mold cavity through a gate and runner system. After the cavity is filled, a holding pressure is

maintained to compensate for material shrinkage as it cools. At this same time, the screw turns so that the next shot is moved into a ready position,

and the barrel retracts as the next shot is heated. Because the mold is kept cold, the plastic solidifies soon after the mold is filled. Once the part

inside the mold cools completely, the mold opens, and the part is ejected. The next injection molding cycle starts the moment the mold closes and

the polymer is injected into the mold cavity.

Injection Molding Materials

Materials Selection: Many types of thermoplastic materials are available. Selection depends on the specific application. The chart below shows

some of the most common materials being used.

Today, as we drive our automobiles, a great many of us, can enjoy the same comfort levels that we are accustomed to at home and at work. With the

push of a button or the slide of a lever, we make the seamless transition from heating to cooling and back again without ever wondering how this

change occurs. That is, unless something goes away.

This is car air outlet or air window.We built this mold with 2 cavities and the raw material of plastic parts is ABS.

Weilin can provide the service from design to production,which we have 24 injection machine from 30T to 250T.

Welcome to order injection mold and production order.