Environmental Programmable High And Low Temperature & Humidity Test Chamber Lab Testing Equipment

Price Negotiable

MOQ: 1set

Delivery Time: 5-25 days

Brand: BOTO

Product Description

Temperature Humidity Rapid Change Tester Thermal Environmental Programmable High and low temperature test chamber

Product Description

1. Product Name: Temperature and Humidity Test Chamber

2. Product Model:BT- GX-3000-LH

3. Description:

The thermal shock testing chamber is used for the temperature rapid change shock test for materials. The low and high temperature test storage tank can be guided into the test chamber for the rapid temperature change shock test. Also, the balance temperature control system and the wind circulatory system with the P.I.D control can ensure the stability of the system.

4.Technical Parameter:

Mode	BT-GX-3000-80L		BT-GX-3000-150L		BT-GX-3000-225L	BT-GX-3000-408L	BT-GX-3000-800L	BT-GX-3000-1000L
Inner Size W×H×D(cm)	40×50×40		50×60×50		60×85×80	60×85×80	100×100×80	100×100×100
Outside Size W×H×D(cm)	92×140×90		105×150×110		105×165×120	115×175×140	160×190×160	160x190x180
Volume (L)	80 L		150L		225L	408L	800L	1000L
Temp and Hum Range	A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98%
Function	Fluctuation			±0.5°C ±2.5%RH
	Deviation			±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)
	Controller analytical accuracy			±0.3°C ±2.5%RH
Material	Inner Wall			SUS #304 Stainless steel
	Outer Skin			#SUS 304 Stainless steel
	Heat Preservation			High temperature resistant, High chlorine acid b vinegar foam insulation materials
Wind Cycling Way		Centrifugal fan-broadband type forced air circulation
Refrigeration Way		Single stage compression refrigeration
Refrigerater		French Tecumseh
Refrigerants		R4O4A USA dupont environmental protection refrigerant(R23+R404)
Condensing Way		Air-cooled or water-cooled
Heater		Nickel chrome heating wire heater
Humidifier		Semi-closed steam and wet
Water Suplying Way		Automatic cycling water supply
Standard Accessories		1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line.
Safety device		Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system