Temperature Humidity And Salt Spray Corrosion Test Chamber
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test
conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.
|
Model
|
BT-E809
|
|
Internal Size(WxDxH)
|
2500x1000x1500mm
|
|
External Size (L×W×H)
|
3100x2200x1800mm
|
|
Controller
|
PLC controller, touch screen, programmable, high definition
|
|
Temperature Range
|
Room temperature ~ 60℃
|
|
Room temperature ~ 60℃
|
≤±0.5℃
|
|
Temperature Uniformity
|
≤±2℃
|
|
Temperature Precision
|
±1℃
|
|
Humidity Range
|
30~98% R.H.
|
|
Humidity Precision
|
±3% R.H.
|
|
Test Mode
|
Salt Spray Mode, Wetting Mode, Drying Mode
Tempt. And Humidity Mode.
|
|
Heater System
|
Ti-alloy high speed electrical heating system.
|
|
Humidity & De-humidity System
|
Two independent system. Float level controller to prevent electrical misoperation
|
|
Test Chamber Temperature
|
Salt Spray Method (NSS ACSS)35±1℃
Corrosion-resistant Testing Method (CASS) 50±1℃
|
|
Saturated air Barrel Temperature
|
Salt Spray Method (NSS ACSS)47±1℃
Corrosion-resistant Testing Method (CASS) 63±1℃
|
|
Brine Temperature
|
35℃±1℃
|
|
Spray Quantity
|
0.5~2.5 ml / 80cm2 / hr
|
|
PH value
|
Salt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2
|
|
Lab Volume
|
3.75m3
|
|
Brine Tank Capacity
|
110L
|
|
Multiple Safety Protection Devices
|
Current discharge protection, over-load protection, over temperature protection, shortage protection. With indicate lights
|
|
Water Supply
|
Auto-filling and drainage
|
|
Air Supply
|
8 bar air compressor
|
|
Power source
|
Single-phase, 230±10%V, 50Hz
|
Company profile
BOTO GROUP Ltd. is a private enterprise integrating r&d, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.
![]()
In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.
![]()
The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.
