Aluminium Alloy Micro Strain Transducer For Structural Steelwork
Strain Transmitter
Product Introduction:
Strain Transducer is designed to measure strain in static and dynamic high force loading applications, such as roll stands, injection molding machines, cranes, and many others. This can be directly mounted on a flat surface with two bolts. Two oppositely mounted Strain Transducers can be used when there is a need to compensate for bending effects.
Typical Application:
Measuring of small strain on stiff structures, Load or weight measurement on supports, Surface Strain sensors measure indirectly the Clamping Force on die casting machines, Injection molding machines. Monitoring of Presses, Stamping machines, Structural steelwork, cranes, racks, loading cranes and bridges
Technical Parameters :
| Measuring type | Micro strain, linear deformation |
| Measuring range | ±3000με |
| Power supply | 5VDC |
| Output signal | mv |
| Nonlinearity | ≦0.015%FS |
| Repeatability | ≦0.02%FS |
| Accuracy | Accuracy error:≤2%FS |
| Long-term stability | ≦0.5%FS/Year |
| Operation temp | -25℃—85℃ |
| Zero temp. drift | ≦0.3%FS |
| FS temp. drift | ≦0.3%FS |
| Response time | <3ms |
| Output impedance | 1KΩ |
| Insulation resistance | >1000MΩ/100VDC |
| Overpressure | 120%FS |
| Damage pressure | >300FS |
| Materials | 7075Aluminium Alloy |
| Ingress protection | IP65 |
| Electrical connections | Cable connection |
Definition of wiring:
Dimensions in mm :
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.