Wood Sawdust Pellets Countercurrent Cooler 10 Min Fast Cooling
SKLN Factory Using High Efficiency Sawdust Pellets Countercurrent Cooler
Introduction of countercurrent cooler:
SKLN biomass pellets countercurrent cooler is mainly using for cooling 2-8mm diameter pellets, when outlet from pellet machines, the hot pellets temperature is about 60-80 centigrade, after using the biomass pellets countercurrent cooler, the temperature is not higher than room temperature +3-5.
The biomass pellets countercurrent cooler adopts counter flow theory, cold air goes inside of cooler from bottom and then go out from top, hot pellets goes to cooler from top to bottom, as time goes on, pellets will pulse at the cooler bottom, cold air will cool them at the bottom gradually, in this way will reduce pellets broken, if cold air also go to cooler from top, which same as pellets, then hot pellets will meet with cold air suddenly ,then pellets will be easily broken, especially pellets surface broken easily. So the biomass pellets countercurrent cooler can cool fully and equally, pellet broken rate is smaller than 0.2%.
The SKLN biomass pellets countercurrent cooler generally works with cyclone and air fan, air lock. which is used to clean dust, also it can install a screener at the cooler bottom, which can separate dust and good pellets after cooling.
Mainly Parameter of countercurrent cooler:
| Model | Power (kw) | Capacity (t/h) | Cooling time (min) | Cooling temperature(℃) | Dimension (mm) |
| SKLN-1.2 | 1.5+0.25 | 0.8-1 |
no less than 6-10 min |
No higher than room temperature +3-5℃ | 1750X1600X1960 |
| SKLN-1.5 | 1.5+0.25/1.5+1.5 | 1-2 | 1600X1800X2600 | ||
| SKLN-2.5 | 2.2+0.55/2.2+2.2 | 3-5 | 2000X2100X2200 | ||
| SKLN-4 | 3+0.37/2.2+3 | 5-8 | 2200X2200X3000 |
Product photos of countercurrent cooler:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.