10 Wires Field Hinge Joint Fence 330 Ft Length 47 Inch Height
| Attribute | Value |
|---|---|
| Product Name | HUILONG 10 Wires Hinge Joint Field Fence, 330 ft Length, 47 inch Height |
| Material | Galvanized steel wire |
| Fence Style | Woven Wire |
| Roll Length | 330ft |
| Roll Height | 47inch |
| Edge Wire Diameter | 2.5mm |
| Inner Wire Diameter | 2mm |
| Application | for Farm Field Fence, Deer Fence, Cattle fence etc. |
Hinged field fences are the most commonly used type with economic benefits. Different forms of weaving are used to wrap horizontal lines with vertical lines at each intersection to form hinge joints. This spring-shaped knot will provide maximum elasticity to absorb the most violent impact energy and spring back into its original shape. The hinge joint allows the necessary flexibility to move without breaking the wire when the pressure is placed on the stock over the fence.
A hinged joint fence, often referred to as a farm fence, has four wrapped hinge joints where two vertical draws are wound together to form a hinge joint. The knot acts like a hinge, contracting under pressure and then bouncing back into shape. This provides easy installation as the hinge "gives" while retaining the full height for continued protection and good appearance. Vertical wires are individually cut and wrapped for maximum strength and flexibility.
| No | The specification of Hinge Joint Field Fence | Gross Weight | Top and Bottom Wire Dia. | Inner Wire Dia. |
|---|---|---|---|---|
| 1 | 7/150/813/50 | 102+114+127+140+152+178 | 19.3 | 2.5 |
| 2 | 8/150/813/50 | 89(75)+89+102+114+127+140+152 | 20.8 | 2.5 |
| 3 | 8/150/902/50 | 89+102+114+127+140+152+178 | 21.6 | 2.5 |
| 4 | 8/150/1016/50 | 102+114+127+140+152+178+203 | 22.6 | 2.5 |
| 5 | 8/150/1143/50 | 114+127+140+152+178+203+229 | 23.6 | 2.5 |
| 6 | 9/150/991/50 | 89(75)+89+102+114+127+140+152+178 | 23.9 | 2.5 |
| 7 | 9/150/1245/50 | 102+114+127+140+152+178+203+229 | 26 | 2.5 |
| 8 | 10/150/1194/50 | 89(75)+89+102+114+127+140+152+178+203 | 27.3 | 2.5 |
| 9 | 10/150/1334/50 | 89+102+114+127+140+152+178+203+229 | 28.4 | 2.5 |
| 10 | 11/150/1422/50 | 89(75)+89+102+114+127+140+152+178+203+229 | 30.8 | 2.5 |
Material: Hot dip galvanized wire, Zinc Coating of 40-50g/m², Zinc coating more than 200g/m²
TIPS: 1. The first data in type is the No.of line wire; The second data is horizontal hole size(mm); The third data is the height of the fence(mm); The fourth data is the total length for each roll(m). 2. Other sizes also available.
- Nuded Packing, with label inside
- Plastic film only, with label inside
- Plastic Shrink only, with label inside
- Plastic woven bag, with label inside
- Wooden Pallet or Iron Pallet: special design to ensure the belts stable
- Protect your investment with our most reliable limits for cattle, pigs and other large animals
- Can withstand the needs of large fauna
- Suitable for all terrain, as well as herds and pastures
- Special wire coil can withstand the worst weather, allowing the fence to expand and shrink
- Galvanized wires resistant to weathering and wear
- T Post: Matched and used with Hinge Joint Wire Mesh Fence, which has a steel plate on the top of the post for easier installation
- T Post Clip: Allows you to easily secure the rolled Hinge Joint Wire Mesh Fence to the T-post tightly
- Y Post: Widely used as post for Farm Fences
- Post Driver: Can be used to help drill the post into ground more easily
While High Tensile Hinged joint knot fencing certainly requires different techniques to erect than mild steel, it is no more difficult. Most farms have access to a post driver that can easily drive in strainers to the required depth. Bending and tying off is simple when using the correct technique.
It is a common misconception that a mild steel hinged joint knot fence will cost less than High Tensile. High Tensile mesh rolls may be more expensive to buy, but this is more than compensated for by the reduced numbers of posts and labour required.
We are a 18-year factory and we have registered trading company for sourcing more valuable products for the customers. Therefore, we have both the advantages of factory and trading company. We have our own factory, so we can control the product quality timely and efficiently. At the same time, we also have a professional international trade team, providing good and professional services for customers.
Yes, free sample is available according to your request. And we can also ensure that the quality of the sample is the same as that of the mass products.
T/T (30% deposit in advance), L/C at sight.
Within 7-15 days after receiving customer's deposit or L/C.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.