10x12cm Mesh Gabion Wire Mesh Basket For Protect River Banks
| Attribute | Value |
|---|---|
| Product name | 2.7mm Galvanized Wire 80x100mm Mesh 2*1*1m River Bank Protect Gabion Box Wire Mesh Closure |
| Material | Low Carbon Steel Wire, Galvanized Wire, PVC Coated Iron Wire |
| Standard | ASTM A975, EN |
| Finish | Galvanized, PVC Coated |
| Opening | 60x80, 80x100, 100x120mm |
| Mesh wire diameter | 2.0mm, 2.2mm, 2.7mm |
| Selvedge wire diameter | 2.7mm, 3.0mm, 3.4mm |
| Gabion Box Length | 1m, 1.5m, 2m, 3m, 4m |
| Gabion Box Width | 0.5m, 1m |
| Gabion Box Height | 0.5m, 1m |
| Packaging | in Bundles |
| Application | for slope support, foundation pit support, mountain rock hanging net with shotcrete, slope planting, railway and highway isolation block |
The effect of the gabion wire mesh basket against natural disasters is very good, so we often use the gabion wire mesh basket as a tool to prevent floods. During floods, simply place the empty gabion wire mesh basket in designated locations. We can reinforce weak river sections by filling these baskets with stones according to the specific situation. This creates an effective barrier against flood erosion.
The gabion wire mesh basket is constructed from tightly combined steel wires, ensuring durability during flood conditions. However, it's important to properly prepare the installation area by removing gravel and other debris to prevent instability.
| Standard Mesh dimensions XxY (mm) | Mesh wire Gl dia (mm) | Selvedge wire Gl dia (mm) |
|---|---|---|
| 60x80 | 2.0 | 2.7 |
| 80x100 | 2.2 | 3.0 |
| 100x120 | 2.7 | 3.4 |
| Length (m) | Width (m) | Height (m) |
|---|---|---|
| 1 | 0.5 or 1 | 0.5 or 1 |
| 1.5 | 1 | 0.5 or 1 |
| 2 | 0.5 or 1 | 0.5 or 1 |
| 3 | 1 | 0.5 or 1 |
| 4 | 1 | 0.5 or 1 |
| Length (m) | Width (m) | Height (m) |
|---|---|---|
| 3 | 2 | 0.17, 0.23 or 0.30 |
| 6 | 6 | 0.17, 0.23 or 0.30 |
- Galvanized steel wire: Excellent low-carbon steel wire, diameter: 2.0mm-4.0mm, tensile strength: no less than 380Mpa. The surface adopts hot galvanization for protection.
- Zinc-5% aluminum-mixed alloy steel wire: A new material with corrosion resistance 3 times of traditional pure galvanization; diameter: 2.0mm-4.0mm; tensile strength: no less than 380Mpa.
- Galvanized steel wire with plastic coating: Excellent low-carbon steel with PVC or PE protective coating that increases protection in high pollution environments. Available in different colors.
- Zinc-5% aluminum-mixed alloy steel wire with coating: Alloy steel wire with PVC or PE protective coating that increases protection in high pollution environments. Available in different colors.
Weaving of Gabions:
- Gabions are molded once. Except cover plates, the edge plates, end plates and bottom plates are inseparable. Length/width tolerance (±5%) height tolerance (±5%). The interior part is isolated into independent units by adopting clapboards every one meter.
- Gabions adopt assembly mode. The cover plates, the edge plates, end plates and bottom plates are separately assembled into cages wound by spiral steel wire. All the edge wire of the cage adopts thick wire to improve the strength of the gabions.
Gabion Box Wire Mesh is usually packaged in bundles. According to the specific sizes, Gabion Box panels are woven and then folded into bundles, fixed with a binding belt, and loaded into containers. This packaging method maximizes container space utilization. During installation, the bundles can be unfolded, assembled with binding wire, and filled with stones to form complete Gabion Boxes.
The Gabions must be filled with rock ranging between 100 mm and 250 mm. The range in sizes may allow for a variation of 5% oversize and/or 5% undersize rock, provided it is not placed at the exposed surface. Oversize rock shall not be larger than 300 mm and the undersize rock shall not be smaller than 100 mm.
Note: Rocks shall be hard, angular to round, durable and of such quality that they shall not disintegrate on exposure to water or weathering during the life of the structure. Care should be taken when placing the stone to ensure that the Polymer coating on gabions is not damaged. All visible faces should be carefully hand placed for appearance purposes.
- 18-year factory experience with registered trading company for sourcing valuable products
- Strict quality inspection system from raw materials to final products
- Professional international trade team providing excellent service
- 24-hour response time for any issues, with resolution within 72 hours
- Free samples available
- Custom specifications available upon request
- 1989: Company established in Anping Wire Mesh World Supermarket
- 1994: Anping HUILONG wire mesh factory founded
- 1998: First international cooperation established
- 2004: Became joint venture company
- 2008: Successfully entered European market
- 2009: Built new factory in Taicheng industry park
- 2011: Exported to over 100 countries
- 2012: Established Shijiazhuang international trade branch
- 2015: Joined Anping Wire Mesh Chamber of Commerce
- 2016: Expanded foreign trade team
- 2019: Registered AIBUER TRADING CO., LTD.
- 2020: Established Concertina Razor Wire Factory
- 2021: Expanded domestic trade team
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.