50x100mm Post Triple Pointed Palisade Fencing Hot Dip Galvanized Gp Security Grade
Hot Dip Galvanized GP And Security Grade Steel Palisade Fencing
Steel palisade fencing introduction
Palisade fencing is manufactured and supplied in a wide range of styles, heights, and designs to suit applications ranging from general-purpose boundary demarcation to high security applications.
Palisade is available with either a D or W profile and in seven heights ranging from 1.2-3.0m.
Steel palisade fencing specification
| Heights: | 0.9 m, 1.2 m, 1.5 m, 1.8 m, 2.0 m, 2.4 m, 3.0 m, 3.6 m as standard (other heights available on request) |
| Pale profile: | D-section or W-section (other sections available on request) |
| Pale head styles: | rounded, rounded and notched, single-spike, splayed triple-spike |
| Pale material thickness: | D-section 2.5 mm to 3.5 mm W-section 2.0 mm to 3.0 mm |
| Panel width: | 2750 mm as standard (other widths available on request) |
| Rails: | rolled steel angle (RSA) 50 x 50 x 2.75 mm |
| Posts: | 102 x 44 mm steel RSJ (127 x 76 mm for fences above 2.7 m) hot-dip galvanised and optional polyester powder coat finish |
| Fixings: | zinc-plated steel bolts with shear nuts as standard (stainless steel rivets available for higher security) |
| Finish: | hot-dip galvanised plus optional polyester powder coating in green, black or other colours on request |
| Compliance: | BS EN 1722-12, BS EN ISO 1461, NG TS 2.22 |
| Additional security measures: | contact us to discuss options (eg barbed wire, razor wire or rotating toppings, monitored electric pulse fencing, concrete sills, buried pales) |
Steel palisade fencing features
Strong, durable steel palisade fence
Conforms to BS EN 1722: Part 12
Meets gas, water and electric company specifications
General purpose, commercial and high-security grades
Seven heights from 1.2-3.0m
Five paling top options
Security toppings if required
Powder coating option
Matching gates
Steel palisade fencing details and options
Post centers
2.75m
Heights
1.2m
1.5m
1.8m
2.0m
2.1m
2.4m
3.0m
Paling tops
Single pointed
Triple pointed
Square
Round and notched
Rounded
Pale thickness
‘W’ profile 2.0mm – commercial specification
‘W’ profile 2.5mm – general purpose to BS: EN: 1722 Pt 12
‘W’ profile 3.0mm – security purpose to BS: EN: 1722 Pt 12
‘D’ profile 3.0mm – general purpose to BS: EN: 1722 Pt 12
‘D’ profile 3.5mm – security purpose
‘D’ profile 4.0mm – security purpose to BS: EN: 1722 Pt 12
Horizontal cross rails
Three standard sizes to suit height and site requirements.
45x45mm for 1.2, 1.5 and 1.8m heights
50x50mm for 2.0, 2.1 and 2.4m heights
65x50mm for 3.0m
Installation
Posts
RHS 100x55 IPE
Available with welded or slotted fishplates, complete with loose fishplates that can be concreted-in, base-plated for bolting down, or cranked.
Posts can be vertically extended to take barbed or razor wire.
Panels
Panels can be raked to allow for most site conditions.
Fixings
All fixings are anti-vandal.
For added security, pales can be welded in place.
Finishes
Hot dip galvanised to BS EN ISO 1461 as standard.
Polyester powder coating option.
Accessories
Security topping options
Razor wire coils
Razor wire tape
Barbed wire
Rotating spikes
Gates
Standard and tailor-made gates are available to suit requirements.
They are supplied multi-holed to suit site conditions with an anti-climb PROTECTORGATE slide latch, rear-hung adjustable hinges and padlockable drop-bolts
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.