MIC300-A03 Oxygen Analyzer for Industrial and Laboratory Oxygen Measurement
| Measurement Range | 0-1%-2%-5%-10%-20%-50% |
| Resolution | 0.1PPm/1ppm/0.01%/0.1%/1% |
| Measurement Accuracy | ≤±2%F.S |
| Repeatability | ≤±1%F.S |
| Stability | ≤±1%F.S/7d |
| Response Time | T90≤5S |
| Sample Gas Flow Rate | 400±50mL/min |
| Sample Gas Pressure | 0.10Mpa≤Inlet Pressure≤0.20Mpa |
| Sample Gas Temperature | 0-50℃ |
| Ambient Temperature | －5℃～＋50℃ |
| Ambient Humidity | ≤90%RH |
| Output Signal | 4～20mA (Customizable upon request, must be specified when ordering) |
| Communication Mode | RS232 or RS485 (Communication Protocol:Modbus RTU) |
| Power Supply | 100～240VAC 50/60Hz 1A |
| Dimensions | 280mm (Width) X 145mm (Height) X 310mm (Depth) |
| Instrument Weight | Approximately 6kg |
| Measurement Principle | Zirconia sensor |
| Measurement Medium | Inert gas |
| Instrument Lifespan | five years (under normal use) |
| Sensor Lifespan | five years (under normal use) |
| Precision Sampling Pump | Used when sample gas pressure is negative or atmospheric pressure (optional) |
MIC300-A03 analyzer with a 128*64 dot matrix LCD display, available in desktop or panel-mounted configurations for convenience and ease of use. It utilizes an imported zirconia sensor and is developed with new single-chip microcomputer technology, resulting in a new type of intelligent industrial gas analyzer.
Online analysis on oxygen content in protective gases for high-temperature sintering furnaces of nitrogen production by air separation, chemical process, magnetic materials, and so on; in protective gases for electronic industry; and in glass and building material industries
It is widely used for rapid analysis of oxygen content in protective gases for high-temperature sintering furnaces, protective gases in the electronics industry, and various inert gases and glass manufacturing processes.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.