LH-DY06 Fluorescent Dissolved Oxygen Intelligent Sensor 0~20.00mg/L
LH-DY06 Online water quality monitoring series
Fluorescent Dissolved Oxygen Intelligent Sensor
This sensor is coated with a luminescent material. Green light from an LED is transmitted to the sensor surface. The green light excites the luminescent material. As the material relaxes it emits red light. The time it takes for the red light to be emitted is measured. Between the flashes of blue light, a red LED is flashed on the sensor and used as an internal reference. Increased oxygen in the sample decreases the time it takes for the red light to be emitted. The time measurements correlate to the oxygen concentration.
• Green excitation fluorescence life detection technology, no electrolyte, no interference, no frequent calibration, stable and reliable measurement.
• Built-in temperature sensor automatic compensation function for water temperature.
• Support MODBUS/RS485 & 4-20mA current interface output.
| Model | Parameter |
| Measuring range | 0~20.00mg/L or 0~200% saturation |
| Accuracy | ±5% or ±0.3mg/L |
| Response time | 90s |
| Temperature | DS18B20 digital temperature sensor |
| Working temperature | 5 ~ 40°C |
| Pressure of work | <5bar |
| Digital interface | MODBUS /RS485 |
| Analog interface | 4-20 mA (optional) |
| Power supply | 12VDC±20% |
| Size | φ34x222mm |
| Lifetime of fluorescent cap | 1 year |
| Material | The main body is stainless steel 316 and the sensitive film is silicone |
| Calibration | One point or two point calibration |
| Protection grade | IP68 |
| Cable length | 8m |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.