100L 250L 55 75kW Sand Mill Machine For Wet Grinding Paper Making Inks Pigment
100L 250L 55 75kW Sand Mill Machine For Wet Grindinig Paper Making,Inks Pigment
The main introduction of Wet Grinding Mill:
1.This bead mills are main consists of chamber and disc dispersing system. The double end mechanical sealing with indepent technology could resistant to more than 1600 kinds of solvents.
2.The series have great flow rate and super fine discharging, the finally fineness can be reach 1um for D90 .
3. The cooling efficiency is better than normal mills because the sectional double spiral water course is more beneficial to heat exchange.
4. The grinding efficiency is higher 15-30% than traditional mill machines; the combined disperser can rapidly increase dispersing efficiency.All the materials of contact parts could be chose from wearable steel, stainless steel, PU and ceramics for meeting different requirements.
The Technical Data of Wet Grinding Mill:
| No | main parameters | SP100/SP250 | Note |
| 1 | Non Explosion-proof motor kW | 55/75kW (Non Ex) | |
| 2 | Effective volume of grinding chamber (L) | 100/250 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 1940*900*2000 | |
| 6 | Weight (kg) | 2000-3000 |
The Configuration instructions:
1.Outer chamber materials: 304 stainless steel
2.Inner Chamber materials: 304 stainless steel or you need
3.Dispersing shaft: 40Cr with hard chromium plating
4.Dispersing disk: PU coated 304 stainless steel
5.Feeding and discharging end covers on the cylinder: 304 stainless steel
6.Turbine centrifugal separator and pins: 304 stainless steel and YG6 pins
7.Static discharge screen ring: Wire Wound screen ring with 304.Gaps: 0.5mm.
8.Mechanical seal: Intelligent double mechanical seal with indepent technology
9.Feeding pump: 1.5” ARO diaphragm pump;
This series from 5L to 300L
| "SUPER" SP series of Bead Mill | ||||
| Type | Working Volume (L) | Power (kW) | Grinding Beads (mm) | Throughput (kg/h) |
| SP5 | 5 | 7.5 | 0.3-3.0 | 20-200 |
| SP15 | 15 | 15 | 0.3-3.0 | 50-500 |
| SP30 | 30 | 30 | 0.3-3.0 | 70-700 |
| SP50 | 50 | 37 | 0.3-3.0 | 100-1000 |
| SP100 | 100 | 55 | 0.3-3.0 | 300-3000 |
| SP250 | 250 | 75 | 0.3-3.0 | 450-4500 |
| SP300 | 300 | 90 | 0.3-3.0 | 550-5500 |
Allwin have more than 25 years experience for the wet grinding and dispersing, we could meet different industry detailed demands,
If you have any quesiton, pls contact us ,also warmly welcome to visit us.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.