Higher Capacity And Save Energy HZPLUS50 Horizontal Bead Mill For MLCC Print Ink Nano Meter Materials LFP
 
    HZPLUS  series is Compound Disc Pin structure with Dynamic discharge( Axis discharge), could meet all kinds of micron fineness griding,, widely used in paints coating, chemical fiber,food,cosmetic and  namo materials industry. this series are general structure with flow discharge, super wearable materials for micron fineness demands.
 
The main introduction of Bead Mill
1. The compact and stable structure : the motor is placed on the upper part, the grinding chamble is placed on the lower part, and the total height of the equipment is low. More than 20L large model sander with cylinder slide rail for easy maintenance.
2. Double end mechanical seal: It has 2 patented technologies, with forced coolant, sealing ring resistant to 1600 kinds of solvents, coolant is compatible with materials, no pollutants, reliable operation.
3. Discharging separation system :Large flow, nonclogging: dynamic hollow rotor-super large area slot cylinder separator uses dynamic centrifugal force separation principle.Use of extremely small grinding beads ( 0.3 to 3 mm).No export blockage occurs under high flow conditions. Good heat dissipation, narrowest particle size distribution.
4. Grinding inner chamble : It has two patented technologies: chamble cooling and disassembly. The chamber volume is from 0.6-300L. The materials are stainless steel, alloy steel, ceramic, hard alloy, polyurethane, etc.
 

The Main  parameter

1.The explosiong-proof motor:37kW

2.Effective volume of grinding chamberL: 50L 

3.Water pressure Mpa:0.3

4.Cooling water consumption:2.0-2.5L/min( Advise offer the cooling water less10°C)

5.Dimension:1900*1200*2000mm

6.Weight:1500kg

The Main instructions of HZPLUS50