H6 Ground Tungsten Carbide Rods 3mm - 26mm
Tungsten Carbide Rods Ground and Unground
The Tungsten Carbide Rods, are used in high quality carbide cutting tools for the machining of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer, taps, ect.
1. Grade: ISO K10-K40
2. Did: 0.4 mm-40 mm
3. Length: 330 mm
4. Surface: Unground or H6 Ground
Carbide Rods with Single Hole
Unit: mm
Other custom size could be discussed.
| D | L | B | Tolerance |
| 3.0 | 300/310/330 | 0.3 | ±0.1 |
| 4.0 | 300/310/330 | 0.6 | ±0.1 |
| 6.0 | 300/310/330 | 1 | ±0.15 |
| 8.0 | 300/310/330 | 1.3 | ±0.15 |
| 10.0 | 300/310/330 | 2 | ±0.2 |
| 12.0 | 300/310/330 | 2 | ±0.2 |
| 14.0 | 300/310/330 | 2 | ±0.2 |
| 16.0 | 300/310/330 | 2 | ±0.2 |
| 18.0 | 300/310/330 | 3 | ±0.25 |
| 20.0 | 300/310/330 | 3 | ±0.25 |
| 22.0 | 300/310/330 | 3 | ±0.25 |
| 24.0 | 300/310/330 | 4 | ±0.3 |
| 26.0 | 300/310/330 | 4 | ±0.3 |
| 28.0 | 300/310/330 | 4 | ±0.3 |
| 30.0 | 300/310/330 | 5 |
±0.35 |
Carbide Rod With Two Straight Holes
Unit: mm
| D | L | B | Tolerance | TK | Tolerance |
| 3.0 | 300/310/330 | 0.4 | ±0.1 | 1.52 | ±0.08 |
| 4.0 | 300/310/330 | 0.8 | ±0.1 | 1.72 | ±0.08 |
| 5.0 | 300/310/330 | 0.8 | ±0.1 | 1.92 | ±0.08 |
| 6.0 | 300/310/330 | 1.0 | ±0.1 | 2.90 | ±0.1 |
| 7.0 | 300/310/330 | 1.0 | ±0.15 | 3.40 | ±0.1 |
| 8.0 | 300/310/330 | 1.0 | ±0.15 | 3.85 | ±0.15 |
| 9.0 | 300/310/330 | 1.4 | ±0.15 | 3.85 | ±0.15 |
| 10.0 | 300/310/330 | 1.4 | ±0.15 | 4.85 | ±0.15 |
| 11.0 | 300/310/330 | 1.4 | ±0.15 | 4.85 | ±0.15 |
| 12.0 | 300/310/330 | 1.8 | ±0.15 | 5.85 | ±0.15 |
| 13.0 | 300/310/330 | 1.8 | ±0.15 | 5.85 | ±0.15 |
| 14.0 | 300/310/330 | 1.8 | ±0.15 | 6.85 | ±0.15 |
| 15.0 | 300/310/330 | 2.0 | ±0.2 | 6.85 | ±0.15 |
| 16.0 | 300/310/330 | 2.0 | ±0.2 | 7.85 | ±0.15 |
| 17.0 | 300/310/330 | 2.0 | ±0.2 | 7.85 | ±0.15 |
| 18.0 | 300/310/330 | 2.0 | ±0.2 | 8.85 | ±0.15 |
| 19.0 | 300/310/330 | 2.0 | ±0.2 | 8.85 | ±0.15 |
| 20.0 | 300/310/330 | 2.5 | ±0.25 | 9.80 | ±0.2 |
| 21.0 | 300/310/330 | 2.5 | ±0.25 | 9.80 | ±0.2 |
| 22.0 | 300/310/330 | 2.5 | ±0.25 | 10.80 | ±0.2 |
| 23.0 | 300/310/330 | 2.5 | ±0.25 | 10.80 | ±0.2 |
| 24.0 | 300/310/330 | 3.0 | ±0.25 | 11.75 | ±0.25 |
| 25.0 | 300/310/330 | 3.0 | ±0.25 | 11.75 | ±0.25 |
| 26.0 | 300/310/330 | 3.0 | ±0.25 | 12.75 | ±0.25 |
Carbide Rod with Helix Holes
Unit: mm
| D | L | B | Tolerance | TK | Tolerance | Pitch ±0.5° |
| 3.0 | 300/310/330 | 0.4 | ±0.1 | 1.6 | ±0.1 | 16.32 |
| 4.0 | 300/310/330 | 0.6 | ±0.1 | 2.1 | ±0.1 | 21.77 |
| 5.0 | 300/310/330 | 0.7 | ±0.1 | 2.4 | ±0.2 | 27.21 |
| 6.0 | 300/310/330 | 0.7 | ±0.1 | 2.4 | ±0.2 | 32.65 |
| 7.0 | 300/310/330 | 1 | ±0.15 | 3.5 | ±0.2 | 38.09 |
| 8.0 | 300/310/330 | 1 | ±0.15 | 3.8 | ±0.2 | 43.53 |
| 9.0 | 300/310/330 | 1.4 | ±0.15 | 4.5 | ±0.3 | 48.97 |
| 10.0 | 300/310/330 | 1.4 | ±0.15 | 4.5 | ±0.3 | 54.41 |
| 11.0 | 300/310/330 | 1.4 | ±0.15 | 4.9 | ±0.4 | 59.86 |
| 12.0 | 300/310/330 | 1.4 | ±0.15 | 5.85 | ±0.4 | 65.3 |
| 13.0 | 300/310/330 | 1.75 | ±0.2 | 6.1 | ±0.4 | 70.74 |
| 14.0 | 300/310/330 | 1.75 | ±0.2 | 6.7 | ±0.4 | 76.18 |
| 15.0 | 300/310/330 | 1.75 | ±0.2 | 7.3 | ±0.4 | 81.62 |
| 16.0 | 300/310/330 | 1.75 | ±0.2 | 7.9 | ±0.4 | 87.06 |
| 17.0 | 300/310/330 | 1.75 | ±0.2 | 8.5 | ±0.4 | 92.5 |
| 18.0 | 300/310/330 | 2 | ±0.25 | 9.15 | ±0.4 | 97.95 |
| 19.0 | 300/310/330 | 2 | ±0.25 | 9.7 | ±0.4 | 103.39 |
| 20.0 | 300/310/330 | 2 | ±0.25 | 9.9 | ±0.5 | 108.83 |
| 22.0 | 300/310/330 | 2 | ±0.25 | 11.1 | ±0.5 | 125.15 |
| 25.0 | 300/310/330 | 2 | ±0.25 | 12.8 | ±0.5 | 136.05 |
Production Equipments:
Production and Test of Tungsten carbide Rods:
1. The mixture of carbide powders will start to prepare as per the customer’s requirement with our wet-grinding machine.
2. Before mass production, we need to do a trial pressing and sintering, and we check the appearances and the sizes of the samples with a micrometer to ensure that the requirements of the drawings can be met before batch production
3. Bulk production, press the raw materials to shape blanks, and carbide tips must be passed by semifinished inspection.
4. sinter blanks to finish (HIP) and finished products' inspection to ensure the best quality and production capacity.
Quality Control:
1. Each rod will be a drop from a 1.2 m high place.
2. All raw materials are tested in terms of density, hardness, and TRS before use.
3. Every piece of product goes through in-process and final inspection.
4. Every batch of product can be traced for our management system.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.