Dia 0.7mm - 45mm Unground Solid Tungsten Carbide Rods With HRA 91.8 To 94.0
Unground Tungsten Carbide Rods
Dia 0.7mm - 45mm Unground Solid Tungsten Carbide Rods With HRA 91.8 To 94.0
The Tungsten Carbide Rods, are used in high quality carbide cutting tools for the machining of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer.
1. Grade: ISO K30-K40
2. Did: 0.7 mm-45 mm
3. Length: 330 mm
4. Surface: Unground or H6 Ground
Tungsten Carbide Rods Unground
Other custom size could be discussed.
| TYPE | DIAMETER(MM) | TOLERANCE OF DIAMETER(MM) | LENGTH(MM) | TOLERANCE OF LENGTH(MM) |
| Ф0.7×330 | 0.7 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф1.0×330 | 1.0 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф1.2×330 | 1.2 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф1.5×330 | 1.5 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф1.6×330 | 1.6 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф1.8×330 | 1.8 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф2.0×330 | 2.0 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф2.3×330 | 2.3 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф2.5×330 | 2.5 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф2.8×330 | 2.8 | +0.3/+0.15 | 330/310 | -0~+5.0 |
| Ф3.0×330 | 3.0 | +0.45/+0.25 | 330/310 | -0~+5.0 |
| Ф3.5×330 | 3.5 | +0.45/+0.25 | 330/310 | -0~+5.0 |
| Ф4.0×330 | 4.0 | +0.45/+0.25 | 330/310 | -0~+5.0 |
| Ф4.5×330 | 4.5 | +0.45/+0.26 | 330/310 | -0~+5.0 |
| Ф5.0×330 | 5.0 | +0.45/+0.25 | 330/310 | -0~+5.0 |
| Ф5.5×330 | 5.5 | +0.45/+0.25 | 330/310 | -0~+5.0 |
| Ф6.0×330 | 6.0 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф6.5×330 | 6.5 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф7.0×330 | 7.0 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф8.0×330 | 8.0 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф8.5×330 | 8.5 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф9.0×330 | 9.0 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф10.0×330 | 10.0 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф10.5×330 | 10.5 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф11.0×330 | 11.0 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф12.0×330 | 12.0 | +0.5/+0.3 | 330/310 | -0~+5.0 |
| Ф13.0×330 | 13.0 | +0.7/+0.3 | 330/310 | -0~+5.0 |
| Ф14.0×330 | 14.0 | +0.7/+0.3 | 330/310 | -0~+5.0 |
| Ф15.0×330 | 15.0 | +0.7/+0.3 | 330/310 | -0~+5.0 |
| Ф16.0×330 | 16.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф17.0×330 | 17.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф18.0×330 | 18.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф19.0×330 | 19.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф20.0×330 | 20.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф21.0×330 | 21.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф22.0×330 | 22.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф23.0×330 | 23.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф24.0×330 | 24.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф25.0×330 | 25.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф26.0×330 | 26.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф27.0×330 | 27.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф28.0×330 | 28.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф29.0×330 | 29.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф30.0×330 | 30.0 | +0.8/+0.3 | 330/310 | -0~+5.0 |
| Ф32.0×330 | 32.0 | +1.0/+0.3 | 330/310 | -0~+5.0 |
| Ф34.0×330 | 34.0 | +1.0/+0.3 | 330/310 | -0~+5.0 |
| Ф36.0×330 | 36.0 | +1.0/+0.3 | 330/310 | -0~+5.0 |
| Ф38.0×330 | 38.0 | +1.0/+0.3 | 330/310 | -0~+5.0 |
| Ф40.0×330 | 40.0 | +1.0/+0.3 | 330/310 | -0~+5.0 |
| Ф42.0×330 | 42.0 | +1.0/+0.3 | 330/310 | -0~+5.0 |
| Ф45.0×330 | 45.0 | +1.0/+0.3 | 330/310 | -0~+5.0 |
Production Workshop:
Production and Test of Tungsten carbide Rods:
1. The mixture of carbide powders will start to prepare as per the customer’s requirement with our wet-grinding machine.
2. Before mass production, we need to do a trial pressing and sintering, and we check the appearances and the sizes of the samples with a micrometer to ensure that the requirements of the drawings can be met before batch production
3. Bulk production, press the raw materials to shape blanks, and carbide tips must be passed by semifinished inspection.
4. sinter blanks to finish (HIP) and finished products' inspection to ensure the best quality and production capacity.
Quality Control:
1. Each rod will be a drop from a 1.2 m high place.
2. All raw materials are tested in terms of density, hardness, and TRS before use.
3. Every piece of product goes through in-process and final inspection.
4. Every batch of product can be traced.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.