All Weather Outdoor Clear Silicone Sealant
SS911 300ml Package Super performance Silicone Weather proofing Sealant Highrise building Curtain Wall Joint Sealing
BaiYun® SS911 Super Performance Silicone Weatherproofing Sealant
Super performance silicone sealant
FEATURES
- Extension/compression movement capability of ±100/-50 percent
- Suits applications in the areas with large difference in temperature and low humidity
- Odorless, non-corrosive cure system
- Excellent weather-ability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes
- Remains flexible over a temperature range of -58°F(-50°C) to 302°F (150°C)
- Excellent un-primed adhesion to wide range of substrates including coated, enameled and reflective glasses, anodized and polyester coated or painted aluminum profiles
- Good compatibility with other neutral silicone sealants
COMPOSITION
- One-part,neutral-cure
- RTV silicone sealant
APPLICATIONS
- Weather-proof sealing in high-rise curtain wall joints
- Weather-proof sealing in big size glass or metal panel curtain wall joint
- Weather-proof sealing in complex construction curtain wall joints
- Weather-proof sealing in situations with high seal requirement
- Weather-proof sealing in other curtain wall joints
TYPICAL PROPERTIES
| Property | Result | Test method |
| Uncured-As Tested at 23°C (73°F) and 50% RH | ||
| Working time(23°C/73°F, 50% RH) | 10-20minutes | |
| Tack-free time(23°C/73°F, 50% RH) | 30-60 minutes | ASTM C679 |
| Curing time(23°C/73°F, 50% RH) | 7-14 days | |
| Flow, Sag or Slump | <0.1mm | ASTM C639 |
| VOC Content | <38g/L | |
| As Cured-After 21 days at 23°C (73°F) and 50% RH | ||
| Durometer Hardness, Shore A | 25-40 | ASTM C661 |
| Peel Strength | 35lb/in | ASTM C719 |
| Joint Movement Capability | +100/-50% | ASTM C719 |
| Tensile Adhesion Strength | ||
| AT 25% extension | 0.32MPa | ASTM C1135 |
| AT 50% extension | 0.42MPa | ASTM C1135 |
| Specifications: Typical property data values should not be used as specifications. Assistance with specifications are available by contacting Guangzhou Baiyun Chemical Industry CO., LTD. | ||
DESCRIPTION
BAIYUN SS911 Super performance Silicone Weather-proofing Sealant is a one-component high movement capacity(+100/-50%) neutral curing silicone sealant designed and tested for weather-proof sealing in curtain wall joints or metal panel curtain wall joints.
SPECIFICATIONS
BAIYUN SS911 Super performance Silicone Weatherproofing Sealant meets or exceeds the requirements of the following specifications for one-part sealants.
Specifications:
·ASTM C920; Type S, Grade NS, Class 50, Use NT, A, G, O
COLORS
BAIYUNSS911 Super performance Silicone Weather-proofing Sealants available in 8 colors:black, gray, white,dark gray,deep brown, rufous,bright yellow and khaki.Custom colors may be ordered to match virtually any substrate.
PACKAGING
BAIYUNSS911 Super performance Silicone Weather-proofing Sealants available in 10.1 fl. oz. (300 ml) plastic caulking cartridges,20 fl. oz. (590 ml) foil sausage packs.
USABLE LIFE AND STORAGE
When stored at or below 27ºC (80ºF) in the original unopened containers, BAIYUN SS911 Super performance Silicone Weatherproofing Sealant has a usable life of 12 months from the date of manufacture.
LIMITATIONS
BAIYUN SS911 Super performance Silicone Weather-proofing Sealant should not be used, applied or is not recommended:
- In structural glazing applications or where the sealant is intended as an adhesive.
- In areas where abrasion and physical abuse are encountered.
- In totally confined spaces as the sealant requires atmospheric moisture for cure.
- On frost-laden or damp surfaces
- To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes.
- In below-grade applications
- On substrates made of polypropylene, polyethylene, polycarbonate and polytetrafluoroethylene.
- Where movement capability greater than +100/-50% is required.
- Where painting of the sealant is required, as the paint film may crack and peel
- For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)
- To surfaces in contact with food
- For use underwater or in other applications where the product will be in continuous contact with water
HANDLING AND SAFETY
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM BAIYUN SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING BAIYUN CUSTOMER SERVICE.
HOW TO USE
Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product.
HEALTH AND ENVIRONMENT INFORMATION
For information and advice regarding transportation,handling,storage and disposal of chemical products,users should refer to the actual Material Safety Data Sheets containing physical,ecological toxicological and other safety-related data.
LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to
ensure that Guangzhou Baiyun Chemical Industry CO., LTD.’s products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Guangzhou Baiyun Chemical Industry CO., LTD.’s sole warranty is that the product will meet the Guangzhou Baiyun Chemical Industry CO., LTD. sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
GUANGZHOU BAIYUN CHEMICAL INDUSTRY CO., LTD. SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
GUANGZHOU BAIYUN CHEMICAL INDUSTRY CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.


