SMM442 Industrial Two-Component Sealant 19L+300ML/600ML Gray+White Superior Ability Of Anti-High-Low Temperature

1.Features

Neutral curing, the recommended mixing ratio is 10:1, the curing time is short, the curing time can be adjusted, and the workpiece can be moved quickly after curing;

It will not turn yellow after curing, has good weather resistance; aging resistance, water resistance,

Excellent resistance to high and low temperature, can be used between -40°C and +260°C, maintain good adhesion, and have no corrosive effect on contacting metals (aluminum, steel, copper, etc.);

Good adhesion to many metals and plastics;

The smell is mellow, and there is no peculiar smell after curing. Low VOC

2,Main Purpose

◆It can be used as two–component felt and sealant for various electronic product, electronical equipment and lamp;

◆ Used as felt and fixation material for electronic device and instruments panel in the Car ,work as moisture-proof, insulate and anti-shock material;

◆ Sealant, caulking and felt for construction and curtain wall project.

3.Typical Technical Data

4.Packing:

Part A: 19L, Part B: 300ml and 600ml are available

5.Technical Service

◆ We provide full technical data of the product;

◆ Debug formulation of the product according requirement of customers, so it can meet special requirement of the product for our customers;

◆ Provide adhesion ability test for customers, evaluate the adhesion ability of our industrial sealant and customer’s material;

◆ We welcome the users communicate, corporate and with our engineers, thereby seek a solution jointly by discussing.

6.Precautions

This product is non-toxic after it is fully cured, but should avoid eye contact and keep away from reach of children before curing; keep the ventilation in the working environment.

Note to users: The information published in this article is all that we believe to be reliable. Due to the wide variety of situations, we cannot understand all the situations, so we cannot guarantee the correctness and applicability of our products in certain usages and uses. Users should understand the product in detail before using the product, and then decide the best way to use it.