S511 Silicone Weatherproofing Sealant Non Corrosive Curing System

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Brand: BAIYUN

Product Description

BAI YUN^®SS511 Silicone Weather-proofing Sealant

FEATURES

Extension/compression movement capability of up to ±35% of the original joint width
Suits applications in the areas with large difference in temperature and low humidity
No unpleasant odor during curing,
Non-corrosive curing system
Excellent weather ability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes
Remains flexible over a temperature range of -58°F(-50°C) to 302°F (150°C)
Excellent unprimed adhesion to wide range of substrates including coated, enameled and reflective glasses, anodized and polyester coated or painted aluminum profiles
Good compatibility with other neutral silicone sealants

COMPOSITION
One-part, neutral-curing
RTV silicone sealant

APPLICATIONS
Weather sealing in glass curtain wall joints
Weather sealing in metal, enamel curtain wall joints
Sealing in expansion joints for concrete, plastic and metal etc
Sealing in roof joints
Many other uses

TYPICAL PROPERTIES

Property	Result	Test method
Uncured-As Tested at 23°C (73°F) and 50% RH
Working time (23°C/73°F, 50% RH)	10minutes
Tack-free time (23°C/73°F, 50% RH)	60minutes	ASTM C679
Curing time (23°C/73°F, 50% RH)	7-14 days
Flow, Sag or Slump	＜0.1mm	ASTM C639
VOC Content	＜39g/L
As Cured-After 21 days at 23°C (73°F) and 50% RH
Durometer Hardness, Shore A	25-45	ASTM C661
Peel Strength	29lb/in	ASTM C794
Joint Movement Capability	±35%	ASTM C719
Specifications: Typical property data values should not be used as specifications. Assistance with specifications are available by contacting Guangzhou Baiyun Chemical Industry CO., LTD.

SPECIFICATIONS

·ASTM C920; Type S, Grade NS, Class 35, Use NT, A, G, M,O

COLORS

Black, gray and white (standard colors)

Other wide variety of colors (customized)

PACKAGING

500 mL sausage

USABLE LIFE AND STORAGE

12 months from the date of manufacture when stored at or below 27ºC (80ºF) in the original unopened containers.

LIMITATIONS

This product should not be used, applied or recommended:

In structural glazing applications or where the sealant is intended as an adhesive.
In areas where abrasion and physical abuse are encountered.
In totally confined spaces as the sealant requires atmospheric moisture for cure.
On frost-laden or damp surfaces
To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes.
In below-grade applications
On substrates made of polypropylene, polyethylene, polycarbonate and poly tetrafluoroethylene.
Where movement capability greater than ±35% is required.
Where painting of the sealant is required, as the paint film may crack and peel
For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)
To surfaces in contact with food
For use underwater or in other applications where the product will be in continuous contact with water

HANDLING AND SAFETY

PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM BAIYUN SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING BAIYUN CUSTOMER SERVICE.

HOW TO USE

Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product.

HEALTH AND ENVIRONMENT INFORMATION

For information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual Material Safety Data Sheets containing physical, ecological toxicological and other safety-related data.