ASTM 1202 Printing 1mm Pre Painted Colour Coated Sheet Coil

1. Product Overview

Printing sheet and plate in this page refers to a broad aluminum sheet and plate range supplied in multiple alloy series for construction, roofing, container plate, and general fabricated panel use. The listed material range covers 1xxx, 3xxx, 5xxx, 2xxx, 6xxx, and 7xxx series, which means the product is positioned for different combinations of formability, corrosion resistance, surface finish, and strength requirement.

The available size range is wide, from 0.1mm to 200mm in thickness and from 2mm to 2200mm in width. This makes the product suitable for both thin sheet applications and thicker plate-based fabrication where custom length and surface finish are required.

2. Technical Solution

This product is supplied as aluminum sheet or plate rather than a single fixed alloy item. In practical use, the technical route depends on three main factors: alloy family, thickness range, and final surface requirement.

The listed alloys include 1060, 1100, and 1200 for general sheet and surface-oriented applications, 3003 and 3004 for common panel and roofing related fabrication, 5052, 5754, 5083, and related 5xxx grades for better corrosion-related applications, and 6061, 6082, 2024, and 7075 for projects where structural or machining related requirements are more important.

Surface condition also changes the application route. Mill finish is suitable for further processing. Bright, polished, brush, hair line, sand blast, embossed, and etched finishes are more suitable where appearance or surface texture is part of the final product requirement.

3. Specifications

4. Application

• This material is suitable for container plate, construction, boiler plate, roofing, and general building material applications.
• It can also be used for fabricated panels, decorative sheets, embossed or etched surface parts, and custom-cut plate components where alloy selection and surface finish need to match the final use.
• For broad industrial use, the large material range makes it suitable for both general-purpose sheet applications and more specialized fabricated plate parts.

5. Processing

• The sheet and plate can be supplied in cut length according to project requirement.
• It is suitable for cutting, polishing, brushing, embossing, etching, and general sheet or plate fabrication.
• Surface finish should be selected before downstream processing when the final application includes visible faces or decorative requirements.
• Thickness and alloy should be selected together according to the forming route, machining route, and final structural requirement.

6. Advantages

• The listed alloy range is broad enough to cover general sheet use, decorative surface use, corrosion-related use, and higher-strength fabricated parts.
• The 0.1–200mm thickness range supports both thin sheet and heavier plate applications.
• The 2–2200mm width range allows the product to match narrow precision parts and wider panel layouts.
• Multiple surface finishes make the product suitable for both industrial and appearance-focused applications.
• Custom length from 1m to 12m improves flexibility for project-based cutting and material utilization.

7. How to Choose

• Choose 1060, 1100, or 1200 when the project is more focused on general sheet use, surface finish, or easier forming.
• Choose 3003 or 3004 for general panel, roofing, and building-related sheet fabrication.
• Choose 5052, 5754, 5083, or related 5xxx grades when better corrosion-related performance is more important.
• Choose 6061 or 6082 when the project includes structural fabricated parts and machining-related requirements.
• Choose 2024 or 7075 only when higher strength is more important and the final application route is clearly defined.
• Choose the surface finish according to whether the final part is industrial, decorative, textured, or appearance-critical.

8. FAQ

Q1. Is this product steel or aluminum
Based on the listed material grades such as 1060, 3003, 5052, 6061, and 7075, this page corresponds to an aluminum sheet and plate range.

Q2. What is the thickness range
The thickness range is 0.1–200mm.

Q3. What is the width range
The width range is 2–2200mm.

Q4. Can the length be customized
Yes. Length can be supplied from 1m to 12m or as required.

Q5. What surface finishes are available
Available surfaces include mill, bright, polished, hair line, brush, sand blast, checkered, embossed, and etching.