0.35mm CGCC Z180 Prepainted Steel Coil RAL 5236 for Roofing and Building Panel Applications
0.35mm CGCC Z180 Prepainted Steel Coil RAL 5236 for Roofing and Building Panel Applications
１．Product Overview
0.35mm CGCC Z180 Prepainted Steel Coil is a color coated galvanized steel product used for roofing panels, wall cladding, steel structure buildings, furniture components, vehicle parts, and electrical equipment panels.
The product uses CGCC substrate with 180g/m² zinc coating and PE coating system. The 0.35mm thickness supports lightweight panel forming, while the pre-painted surface provides corrosion protection, decorative appearance, and reduced secondary painting work.
２．Technical Solution
The galvanized steel substrate is protected by 180g/m² zinc coating. This metallic coating provides corrosion resistance for building and industrial applications.
The top surface uses 10 Micron Polyester + 5 Micron Primer to support coating adhesion and surface appearance. The back surface uses 5–7 Micron Primer to improve reverse-side protection during storage, transportation, forming, and installation.
PE coating is suitable for general roofing, wall panel, and building material applications where balanced appearance and processing performance are required.
３．Specifications
| Parameter | Value |
|---|---|
| Product Name | Pre-painted Steel Coil |
| Product Type | Prepainted Galvanized Steel Coil |
| Grade | CGCC |
| Thickness | 0.35mm |
| Width | 1000mm |
| Coil ID | 508mm |
| Zinc Coating | 180g/m² |
| Top Surface | 10 Micron Polyester + 5 Micron Primer |
| Back Surface | 5–7 Micron Primer |
| Paint Type | PE |
| Surface Color | RAL 5236 |
| Certification | ISO14000 |
| MOQ | 25MT |
| Packing | Standard Export Packing |
４．Application
- Roofing sheets
- Wall cladding panels
- Steel structure workshops
- Airport buildings
- Storage buildings
- Vehicle manufacturing components
- Shipbuilding components
- Furniture panels
- Electrical equipment panels
- Decorative building sheets
５．Processing
- Roll forming
- Roofing sheet production
- Wall panel fabrication
- Slitting
- Cut-to-length processing
- Bending
- Profiling
- Panel forming
- Decorative sheet processing
６．Advantages
- 0.35mm thickness supports lightweight roofing and wall panel applications.
- 180g/m² zinc coating improves corrosion protection for building use.
- 10 Micron Polyester + 5 Micron Primer top surface supports coating adhesion and appearance stability.
- 5–7 Micron back primer improves reverse-side protection during fabrication and installation.
- RAL 5236 color supports consistent project appearance.
- 1000mm width is suitable for common panel forming and sheet processing.
- PE coating provides a practical solution for general construction and decorative applications.
７．How to Choose
- Choose 0.35mm thickness for lightweight roofing, wall cladding, and decorative panel applications.
- Select Z180 coating when higher corrosion protection is required than low-zinc coating options.
- Use PE coating for general building panels and indoor or standard outdoor applications.
- Confirm RAL 5236 color before production to maintain color consistency.
- Verify coil width and coil ID compatibility with slitting, roll forming, and panel production equipment.
８．FAQ
Q1．What is the substrate grade?
The substrate grade is CGCC.
Q2．What is the specified thickness and width?
The specified thickness is 0.35mm and the width is 1000mm.
Q3．What is the zinc coating level?
The zinc coating is 180g/m².
Q4．What paint system is used?
The product uses PE coating with 10 Micron Polyester + 5 Micron Primer on the top surface.
Q5．What applications are suitable for this product?
It is suitable for roofing sheets, wall cladding, steel structure buildings, vehicle parts, shipbuilding components, furniture panels, and electrical equipment panels.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.