Solenoid Valve Connectors Din 43650-C Line-Socket Plug DC Voltage Coils Connector

1. The solenoid valve controls the flow of the fluid from inlet port to the outlet port

2. Whether applications require directional control, proportional or miniature valve technology

3. The solenoid valve controls the flow of the fluid from inlet port to the outlet port

4. The outlet port is eventually connected to the process where the fluid is required

5. This is body of the solenoid coil. The body of the solenoid coil is cylindrical in shape, and it is hollow from inside

6. these solenoid valves are suitable for all hazardous areas of category 2 and 3 and are certified in accordance with ATEX, IECEx, EAC, NEPSI, Kosha, TIIS

General Details

Contacts: 3+PE

Connector design: female connector

Connector locking system: central bolt

Termination: screw clamp

Wire gauge (mm): min. 0,34 mm², max. 1,5 mm²

Wire gauge (AWG): min. AWG 22, max. AWG 16

Cable outlet: 6,0 - 8,0 mm

Upper limit temperature: 120 °C

Lower limit temperature: -30 °C

Electrical values

Rated current (40 °C): 10 A

Rated voltage: 250 V

Rated impulse voltage: 4000 V

Pollution degree: 3

Overvoltage category: III

Insulating material group: III

Volume resistivity: ≤ 15 mΩ

Insulation resistance: ≥ 10¹⁰Ω

EMC compliance: not shielded

Degree of protection: IP65

Mechanical operation: > 50 Mating cycles

Material

Contact material: CuSn (bronze)

Contact plating: Ni (nickel)

Contact body material: PA (UL 94 HB)

Housing material: PA

Component part drawing

Product photos