1 Port 10/100M 1310nm Fiber Ethernet Media Converter Fast Selectable Modes
Fast Ethernet Fiber Media Converter 1 Port 10 / 100M 4 Modes Are Selectable
Overview
10/100M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX,100Base-Fx and IEEE 802.3x International Standard etc. It can completely compatible with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also providing cost-efficient hardware support to the information transmission between Broad-Band Personal Net, Fiber Optical City Area Net.
Feature
- Enable/Disable optical link-loss alarm function
- Four transmission modes are selectable
- Comply with IEEE 802.1Q VLAN protocol
- Support 10/100M, Full/Half duplex auto-negotiation
- Support MDI/MDIX auto sense
- Support transmission distance of up to 120km (Dual-fiber)
Optical Parameters
|
Multimode Fiber: 62.5/125, 50/125, 100/140μm |
|
|
MM2km orMM5km |
Output power: -20-- -18dBm |
|
Receiving sensitivity: -31dBm |
|
|
Distance: 0~2km or 0~5km |
|
|
Connector: SC(standard)/FC(optional) /ST(optional) |
|
|
Type: dual-fiber |
|
|
Wavelength: 850nm/1310nm |
|
|
Single-mode Fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm |
|
|
25km
|
Distance: 0~25km |
|
Output power:-15~-8dBm (dual-fiber),-14~-8dBm (single-fiber) |
|
|
Receiving sensitivity: <-34dBm(dual-fiber), <-33dBm(single-fiber) |
|
|
Connector: SC(standard)/FC(optional) /ST(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
|
|
40km
|
Distance: 0~40km |
|
Output power: -10~-5dBm (dual-fiber),-9~-5dBm (single-fiber) |
|
|
Receiving sensitivity: < -36dBm(dual-fiber),<-33dBm(single-fiber) |
|
|
Connector: SC(standard)/FC(optional) /ST(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
|
|
60km |
Distance: 0~60km (when less than 15km, use attenuator) |
|
Output power: -5~0dBm(dual-fiber),-6~0dbm(single-fiber) |
|
|
Receiving sensitivity: < -36dBm |
|
|
Connector: SC(standard)/FC(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
|
|
80km |
Distance: 0~80km (when less than 15km, use attenuator) |
|
Output power:-8~-2dBm(dual-fiber),-3~3dbm(single-fiber) |
|
|
Receiving sensitivity: < -36dBm |
|
|
Connector: SC(standard)/FC(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) |
|
|
100km |
Distance: 0~100km (when less than 15km, use attenuator) |
|
Output power:-6~-1dBm |
|
|
Receiving sensitivity: < -38dBm |
|
|
Connector: SC(standard)/FC(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) |
|
|
120km
|
Distance: 0~120km (when less than 15km, use attenuator) |
|
Output power:-5~0dBm |
|
|
Receiving sensitivity: < -38dBm |
|
|
Connector: SC(standard)/FC(optional) |
|
|
Type: dual-fiber |
|
|
Wavelength: 1550nm |
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.