D004 Dome Fiber Optic Splice Closure Apply Aerial Wall-Mounting Epon Olt

Description

Dome Fiber Optic Splice Closure is used in aerial, wall-mounting applications, for the straight-through and branching splice of the fiber cable. The device allows for direct jointing and underground jointing. It also protects fiber optic splices from the elements while providing fast and easy no-cost re-entry.

Feature

1). Can be used in straight-through and branch application for cables of bunchy fiber and ribbon fiber.

2). Engineering plastic body filled with silicon rubber and sealed with hoop, the entry ports are sealed with mechanical screw thread.

3). Suitable for aerial duct wall -mounted or buried applications.

4). Quick open clamped dome-base design, no special tools are needed to open the closure; it can be opened repeatedly, without changing sealing material.

5). Mechanical design suitable for installing, fiber splicing storage and cable connection

6). Fiber optic splice tray with its opening angel above 90 degree, trays can be increased and reduced according to the application.

Specification

Material: PP

Size: 33.5cm(height)*18cm(diameter)

No. of Cable Inlet/Outlet: four

Number of Fibers per Tray: 12 or 24 core

Max. Number of Trays: 3

Max. Number of Fibers: 72 core( 3X 24 core)

Parameters

Applicable environment temperatures: -10°C~+70°C

Air pressure: 70~106Kpa

Pull-out strength≥1000N, force to shell≥2000N , impact: 16N.m

Bending force to fiber cable: 150N (±45°), torsion force to fiber cable: 30N.m (±90°)

Tightness: no pressure drop within the enclosure pressurized to 60Kpa at 70°C for 100 hours

Insulation resistance≥2×104MΩ,resistance to 1.5KV/min without break down