57mm 1.8 High Torque Stepper Motor With Gearbox 15kg Cm 195 Oz In 1.5V 3A
57BYGH636-79AG6 high torque 1.5V 3A Powder metallurgy stepper gearbox motor IP40
57BYGH636-79AG6 is consist of a DC 57mm stepper motor and a 56mm planetary gearbox. With the same load capacity, our powder metallurgy planetary gearbox has a higher lifespan than the traditional gearboxes. The key aspects are to improve efficiency and reliability in any mechanical system. There're also some cost-effective choices of material such as zinc alloy and engineering plastic.
This model is using a 56mm powder metallurgy gearbox, which can choose from the following reduction ratio:
Stage 1
1/4, 1/6
Stage 2
1/15, 1/18, 1/26
Stage 3
1/47, 1/66
Please scroll down to see more details about the gearbox
Electrical Specification
| STEP ANGLE | °/STEP | 1.8 |
| RATED VOLTAGE | V | 1.5 |
| CURRENT | A/PHASE | 3 |
| RESISTANCE | Ω/PHASE | 0.5 |
| INDUCTANCE | mH/PHASE | 1.8 |
| HOLDING TORQUE | kg.cm | 15 |
| INSULATION CLASS | B | |
*Products can be customized by special request.
GEARBOX Electrical Specification
Out diameter 56mm Powder metallurgy
| Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
| Powder metallurgy | sleeve bearings | ≤450 | ≤200 | ≤1000 | ≤0.03 | ≤0.1 | ≤1.5 |
| Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% |
Length L (mm) |
Weight(g) | Number of gear trains |
| 1/4 | 2.0 | 6.0 | 81% | 41.3 | 491 | 1 |
| 1/6 | ||||||
| 1/15 | 8.0 | 25 | 72% | 59.6 | 700 | 2 |
| 1/18 | ||||||
| 1/26 | ||||||
| 1/47 | 16 |
50
|
72% | 59.6 | 700 | 2 |
| 1/66 |
Mechanical Dimension
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.