3P SMT Production Line

Price Negotiable

Price: USD1000-30000

MOQ: 1 Set

Delivery Time: 15-30 days

Brand: Seprays

Product Description

3P SMT Production Line

Economical Wave Soldering Machine PCB soldering machine SMT Machine

*Machine Specification*
Model	ZM350		Solder pot type	4^th adjustable
PCB width	Max.50~350mm		Heating technology	Matrix straight heating, heating efficiency up to 95%
PCB convey height	750±50mm		Solder pot temp.	Room temp.to 350℃,accuracy±1-2℃
Conveyor speed	0-1800mm/Min		Solder pot temp. accuracy	±1℃
Angle	3~7 degree		Finger types	FJ type/L type/ customized
Component height limit	Max.100mm		Solder bar adding way	Manually
Wave height range	0~18mm keep steady		Temp. control	P.I.D+SSR
Wave quantity	2		Machine control	PLC+PC
Preheating length	1800MM		Width adjust	Manually/motorized (option)
Preheating zone	4 zones		Flux adding way	Automatically
Conveyor direction	Left to right		Flux flow rate	10~100ml/min
Preheat power	20 KW		Spray method	Step motor
Preheat temp.	Room temp.~250℃ (adjustable)		Flux recycle	Tray to collect
Heating model	Hot air		Electricity	3P 5 wires 380V/3P 220V
*Machine cover*
Structure	Streamline cover design, the frame is made of thick square tube, the cover is made of 2mm steel plate. There are totally 6 wheels to move the machine easily.
Front door structure	Fully enclosed glass door, transparent,pneumatic holder to support, ensure the operating and repairing space.
Machine top	Anti-explosion lamp
Surface treatment	Painted with white color
*Flux spraying*
Spray nozzle	Spray range:20~65mm,adjustable,nozzle height: 50~80mm adjustable,max. flow rate:100ml/min
Air circuit	Acid and alkali resistant air pipe, the brand is SMC from Japan.
Nozzle moving system	Step motor to drive, Mitsubishi PLC, with proximity switch and entrance sensor to control, according to the coming PCB’s speed and width, the spraying system can detect and starts to work.
Flux recycle system	Tray to hold the waste water and flux, can be draw out easily, make maintenance very convenient.
Flux exhaust system	Exhaust system: stainless steel mesh frame+ double layers filter, recycle the flux to maximum.
Isolated air curtain	Air pressure type knife, blow the redundant flux into the recycling box, to avoid the flux to enter into the preheating zones, ensures the safety.
Spraying box structure	Made of full stainless steel, easy to clean and repair. Anti-corrosion, very durable.
*Preheating*
Preheating zone quan.	Preheating length is 1800mm, divided into 4 sections, supply abundant adjusting space, very good for big PCB and complicated PCB. Reduce the heat impact on PCB, improve the production efficiency.
Temp. control method	Mitsubishi temp. collecting module, PID is very precise and stable.
Heating parts	The heaters are imported from Taiwan, heat up very fast, with long life, small thermo lag; The heat is even in the zones.
Preheating power	22kw
Install mode	The heating module adopts drawer design, easy to replace and repair, make the maintenance very convenient.
*Transmission*
Rail		Made of aluminum, wear resistant and without distortion.
Rail parallelism		Width adjusting accuracy less than 0.2mm
Width adjust		Manually/motorized
C/V speed setting unit		Min.1mm/min 0-1800mm/min
C/V speed variation range		Electric closed-loop control, within 0-10mm/min
Conveying motor		TCG motor from Taiwan, 90w, with over-loaded protection function.