Through Hole Printed Circuit Board Service Mixed Assembly Advantages Drills
Mixed Assembly Advantages Drills Through Plating Through Hole Pcb Assembly.
YDY PCBA are fully equipped to handle the following through-hole PCB assembly services:
- Manual and automated placement of components
- Double Wave Flow Solder
- RoHS soldering using tin-lead solder
- Functional testing
Get end-to-end through hole PCB assembly (THA) solutions from prototypes to production.
Our through hole PCB Assembly services comprise of both manual and automated techniques. While our manual techniques can handle complex assemblies, the automated ones are best suited for small-volume production as also reduced material handling.
PCB Manufacture Capacity
| Service type | Through Hole Pcb Assembly. |
| Material | FR-4,FR2.Taconic,Rogers, CEM-1 CEM-3,ceramic , crockery Metal-backed Laminate |
| Surface Finish | HASL(LF), Gold plating, Electroless nickel immersion gold, Immersion Tin, OSP(Entek) |
| Finish Board Thickness | 0.2mm-6.00 mm(8mil-126mil) |
| Copper Thickness | 1/2 oz min;12 oz max |
| Solder Mask | Green/Black/White/Red/Blue/Yellow |
| Min.Trace Width & Line Spacing | 0.075mm/0.1mm(3mil/4mil) |
| Min.Hole Diameter for CNC Driling | 0.1mm(4mil) |
| Min.Hole Diameter for punching | 0.9mm(35mil) |
| Biggest panel size | 610mm*508mm |
| Hole Positon | +/-0.075mm(3mil) CNC Driling |
| Conductor Width(W) |
0.05mm(2mil)or; +/-20% of original artwork |
| Hole Diameter(H) |
PTH L:+/-0.075mm(3mil); Non-PTH L:+/-0.05mm(2mil) |
| Outline Tolerance |
0.125mm(5mil) CNC Routing; +/-0.15mm(6mil) by Punching |
| Insulation Resistance | 10Kohm-20Mohm |
| Conductivity | <50ohm |
| Test Voltage | 10-300V |
| Panel Size | 110×100mm(min);660×600mm(max) |
| Layer-layer misregistration |
4 layers:0.15mm(6mil)max; 6 layers:0.25mm(10mil)max |
| Min.spacing between hole edge to circuity pqttern of an inner layer | 0.25mm(10mil) |
| Min.spacing between board oulineto circuitry pattern of an inner layer | 0.25mm(10mil) |
| Board thickness tolerance |
4 layers:+/-0.13mm(5mil); 6 layers:+/-0.15mm(6mil) |
| Impedance Control | +/-10% |
Above everything, we have a highly trained and experienced team that specializes both in hand soldering of components as also automated insertion for both axial and radial components as also automated dual wave solder.
In addition to through hole PCB assembly, we also provide value-added services, such as conformal coating, labeling, and complete PCB encapsulation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.