PCB Copy PCB Cloning PCB Duplication PCB Reverse Engineering Electronic Circuits
PCB Reverse Engineering Reproduction Static Flex Board Printed Board
We will reverse engineer your PCB sample, and submit the engineering file into : PCB Gerber File,BOM List,Schematic Diagram.
PCB reverse engineering is also known as PCB Copy, PCB cloning or PCB duplication. It is a reversely researching technology based on exisiting physical PCB boards.
| Reverse Engineering For Quote require | Sample for analysis |
||
| After Reverse Engineering what YDY provide? |
1. Gerber file,BOM list,IC decryption & software 4. Free samples |
||
| What I will required: | Images of PCB with components | Images without components |
PCB SMT Manufacture Capacity
| NO | Item | Technical capabilities |
| 1 | Layers | 1-20 layers |
| 2 | Max. Board size | 2000×610mm |
| 3 | Min. board Thickness | 2-layer 0.15mm |
| 4-layer 0.4mm | ||
| 6-layer 0.6mm | ||
| 8-layer 1.5mm | ||
| 10-layer 1.6~2.0mm | ||
| 4 | Min. line Width/Space | 0.1mm(4mil) |
| 5 | Max. Copper thickness | 10OZ |
| 6 | Min. S/M Pitch | 0.1mm(4mil) |
| 7 | Min. hole size | 0.2mm(8mil) |
| 8 | Hole dia. Tolerance (PTH) | ±0.05mm(2mil) |
| 9 | Hole dia. Tolerance (NPTH) | +0/-0.05mm(2mil) |
| 10 | Hole position deviation | ±0.05mm(2mil) |
| 11 | Outline tolerance | ±0.10mm(4mil) |
| 12 | Twist & Bent | 0.75% |
| 13 | Insulation Resistance | >10 12 Ω Normal |
| 14 | Electric strength | >1.3kv/mm |
| 15 | S/M abrasion | >6H |
| 16 | Thermal stress | 288°C 10Sec |
In order to reverse engineer a PCB, technicians start by examining and identifying the various components of the board. Each board will typically have resistors, capacitors, LEDs, a transistor, an inductor and various other features. The task here is to determine how the layout of these features gives the PCB its unique capabilities.
Before disassembly, the reverse-engineering team will photograph the board up close from the front and back to create a record of the board’s composition. Once the notes and images are collected, the engineers begin the process of deconstructing the board.
YDY service:
1. PCBA, PCB assembly: SMT & PTH & BGA
2. PCBA and enclosure design
3. Components sourcing and purchasing
4. Quick prototyping
5. Plastic injection molding
6. Metal sheet stamping
7. Final assembly
8. Test: AOI, In-Circuit Test (ICT), Functional Test (FCT)
9. Custom clearance for material importing and product exporting
10. PCBA reverse engineering
11. Professtional R&D team
12. PCB Layout Design
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.