Spectroscopy System Arc / Spark-OES Optical Emission Spectrometer
Spectroscopy System , Arc/Spark-OES Optical Emission Spectrometer
OES
QU6 Optical Emission Spectrometer bring in the advanced technology from the USA. It is the 4th generation Arc/Spark-OES with high performance lowing operating cost for metal analysis and this is the latest research and development of detection equipment. The overall optical design has been enhanced, and with improvements of CMOS technology used to further improve the performance of the QU6 while retaining the major benefit of earlier units. The CMOS spectrometer is not only contain the full spectrum characteristics of CCD spectrometer but also the extremely low detection limit for non-metallic elements such as C, S, P, B, As, N etc. The operation is simple and easy to learn. The test result is stable and accuracy. It is a good choice of all common metals for incoming and outgoing product quality control.
Optical Emission Spectrometer Technical Parameter
| Item | Index |
| Optical system | |
| Optical structure | The Paschen Runge construction full vacuum type optics system |
| Room temperature | 35℃±0.5℃ |
| Wavelength range | 165~589nm (Extendable) |
| Focal length | 400mm |
| Grating line | 2400m1/mm |
| First order spectral line dispersion rare | 1.2nm/mm |
| Detector | Multi block high performance linear CMOS array |
| Average resolution ratio | 10pm/pixel |
| Excitation table | |
| Gas | Rushing argon (99.999%) |
| Argon flow rate |
When excited: 3-5L/min Standby time: no need for standby traffic |
| Electrode | Tungsten electrode technology |
| Purge | Automatic purge function |
| Make up | Thermal deformation self-compensation design |
| Analyze the gap | Sample stage:3.4 mm |
| Excitation light | |
| Type | HEPS |
| Frequency | 100-1000HZ |
| Discharge current | 1-400A |
| Special technology | Optimization of discharge parameters design |
| Pre -combustion | High-energy pre-combustion technology |
| Processor | High end ARM, high-speed data synchronization acquisition and processing |
| Data collection system | |
| Interface | Ethernet data transmission based on DM9000A |
| Power | 220VAC 50/60Hz(Customized) |
| Others | |
| Base | Fe, Cu, Al, Ni, Co, Mg, Ti, Zn, Pb, Sn, Ag, Mn, Cr etc |
| Power consumption | Maximum:750W standby:100W |
| Working temperature | 10-35℃(temperature ≥5°C) |
| Working humidity | 20-85% |
| Dimension | 860mm(L)*680mm(W)*438mm(H) |
| Weight | About 100Kg |
Optional items
| Optional item | Qty | Note |
| High purity argon gas (pure ≧ 99.999%) | 1 bottle | Should prepare by customer. If can’t get should use argon purifier to get 99.999% argon gas. |
| Small air conditioning | 1 set | Essential, customer should prepare by themselves. |
| High precision magnetic saturation voltage stabilizer (1KVA) | 1 set | Need for voltage instability, if the customer uses intermediate frequency furnace, then need 3KVA Voltage Stabilizer |
| Argon purifier | 1 set | When argon gas is not as pure as 99.999%. |
| Samples grinder (ferrous metals) or Mini lathe (non-ferrous metals) | 1 set | Essential |
| Type samples | pieces | Essential for foundry |
Authentication
Exhibition
Instrument commissioning and training
Customer visit
Add: No.151, Zhuzhou Road, Laoshan District, Qingdao, Shandong, China
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.