Do waterjet cutting equipment have any requirements for water quality?

The water quality required for waterjet cutting equipment is generally tap water, but the importance of good water quality is not only conducive to improving the reliability and service life of pump seals and valves, but also key to prolonging the service life of gem nozzles and generating ultra-high pressure water jets. significance. The working pressure of the equipment is very high, and the nozzle is very small. Some small particles and impurities, scaling and corrosion ions in the water will have a certain impact on the service life and processing accuracy of the equipment. Therefore, the equipment should be used only after disposal.

In order to ensure the stable operation of pumps, valves, seals and jewel nozzles, a strainer or filter is installed at the inlet of the pump. When the water cleanliness of the cleaning device is low, multi-stage filters should be considered to reduce the number of times the filter screen or filter is cleaned. In the case of high filter accuracy, due to the large filter resistance loss, it is necessary to ensure that there is sufficient pressure at the inlet of the filter system. If appropriate, a pre-centrifugal pump (especially a high-pressure pump) can be set up to ensure that the intake system is not affected by cavitation and maintain the continuity of intake.

Specific water quality treatment requirements involve the following three points:

1. The water quality of the water source;

2. The life of the jewel nozzle used;

3. Continuous work of water jet cutting equipment

The device includes the following three aspects:

1. Water softener;

2. Water purification device;

3. Dissociation device

A-1449 Hydraulic Filter 0.45 Micron for Waterjet Cutting Machine Water Jet Hydraulic Filter Waterjet Pump Parts: