Aluminum Alloy Housing Night Vision USB Camera Module 4 LEDs For Vehicle
Aluminum Alloy Housing Night Vision USB Camera Module 4 LEDs For Vehicle
In Vehicle Night Vision USB Camera Module With Aluminum Alloy Housing And 4 LEDs
Night Vision USB Camera Module
This is our newly developed car camera module. It uses an all-aluminum alloy shell and uses waterproof rubber gaskets for waterproofing.
Today, with the rapid development of automotive electronics and security technology, on-board cameras have become indispensable hardware for traffic safety. It mainly has the following functions:
1. Provide reliable evidence for the analysis and judgment of traffic accidents.
2. It is convenient for drivers and passengers to check the situation in the car.
3. Provide a basis for handling problems such as passenger disputes, lost property finding, robbery and theft prevention in the car.
4. Provide monitoring of the environment inside and outside the vehicle compartment to provide safety guarantee for vehicle driving.
performance
Specification
|
Model No |
SNS-5MP-IMX335-H1 |
|
Sensor |
1/2.8’’ SONY IMX335 CMOS |
|
Pixel |
5 Mega Pixel |
|
Most effective pixels |
2592(H) x 1944(V) |
|
Pixel Size |
2.0µm x 2.0µm |
|
Chroma |
Color |
|
Compression format |
MJPEG / YUV2 (YUYV) |
|
Resolution & Frame rate |
See above |
|
Shutter Type |
Electronic rolling shutter |
|
Focus type |
Fixed focus |
|
Microphone |
Built-in |
|
Dynamic range |
72dB |
|
Sensitivity |
>= 2000mV |
|
Interface type |
USB2.0 high speed |
|
Adjustable parameter |
Brightness/Contrast/Color saturation/Hue/Definition/ |
|
Lens |
Focal length: 3.6MM |
|
|
Lens Size: 1/2.8 inch |
|
|
FOV: 90° |
|
|
Thread Size: M12*P0.5 |
|
Audio frequency |
Optional |
|
Power supply |
USB BUS POWER |
|
Power consumption |
DC 5V, 150mA |
|
Main chip |
DSP/SENSOR/FLASH |
|
Auto Exposure Control (AEC) |
Support |
|
Auto White Balance (AEB) |
Support |
|
Auto Gain Control (AGC) |
Support |
|
Dimension |
38mm*38mm (compatible with 32mm*32mm) |
|
Storage temperature |
-20°C to 70°C |
|
Operating temperature |
0°C to 60°C |
|
USB cable length |
Default |
|
Support OS |
WinXP/Vista/Win7/Win8/Win10 |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application scenarios, resolution, size, and lens requirements. We will have a professional team of engineers to assist you in choosing the most suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to confirm the details with you. Once the drawing is confirmed, we will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we will send the samples to you via DHL FedEx UPS or any other courier methods, usually within a week.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.