Butyl Thermoplastic Insulating Glass Sealant Warm Edge Double Glazing Spacers IG

High Performance Butyl Thermoplastic Warm Edge Spacer for IG 910S

910S is the ultimate warm edge spacer for the manufacturing of IG units. It can keep its
plasticity and sealing properates in wide temperature range and will not become harden and
crack. It also has excellent resistance to air aging and perfect adhesion properity to glass and
rigidity. Meanwhile, it will compose and excellent anti-humidity system with elastic sealant due to
its low moisture vapor transmission property.

Application Field
MF910SG is used for the manufacturing of warm edge insulating glass units with varying shapes
and air space widths. The recommended secondary sealant for use include FM840 polysulfide
Sealant, MF881 silicone structural sealant, and MF882 silicone sealant for IG.

Basic Use
surfaces must be clean, dry and free of dust and grease. Contact with any solvent, iol or plasticizer
containing glazing materials should be avoided. MF910SG can be applied by extruder special for
thermoplastic spacer. Its concrete conditon can be achieved by adjusting temperature and pressure
The prederred range of temperature is 100 ℃ to 140 ℃ and operating enviroment temperature
should be 18℃ or above. It is recommended that glazing material compatibility & Adhesion test is
necessary before use

Techical Data - Typical Properties